Currently maximum LED luminous efficiency is about 114 lumens/W, measured at 50mA. Average luminous efficiency is about 104 lumens/W.
Ordinary LED light effect is about 60 lumens / W.
18W is about 130 lumens is about 1080 lumens.
A 42 watt CFL bulb typically produces around 2800 to 3100 lumens of light output.
Depending on the brand, it will give about 18.000 Lumens and equals a 100W HPS lamp
A 150-watt light bulb uses energy at the rate of 150 watts, when it's turned on.
A 23 watt cfl will give off roughly 1600 lumens. However that is only within a few inches of the bulb.
Incandescent: 10-12 lumens per watt CFL: 50 lumens per watt.
It's about 600 lumens. The same brightness comes from a 12 Watt compact fluorescent light (CFL).
Compact fluorescent bulbs are widely used because they use one fifth of the electric power to provide the same amount of light as an incandescent bulb. Incandescent: 12 lumens per watt Halogen: 15 lumens per watt CFL: 50-60 lumens per watt LED: 100 lumens per watt High-pressure sodium: 200 lumens per watt
Should be about 850 lumens. The same brightness is produced by a 15 watt CFL.
This is very bright for indoor lighting, the equivalent of about 350 watts of incandescent lighting, or a 65-watt and 42-watt CFL pair (4200 and 2700 lumens respectively).
LEDs use the smallest amount of electrical power to produce a given amount of light. Approximate data: Incandescent 12 lumens per watt Halogen: 15-17 lumens per watt CFL: 50 lumens per watt LED: 80 lumens per watt Sodium lights as used in street lighting produce 100-200 lumens per watt.
Power = Voltage x Current, so Current = Power / Voltage. {1 amp = (1 watt)/(1volt)}. At 120 Volts, then Current = (13 watts)/(120 volts) = 0.10833 amps.But at 12 volts, (13 watts)/(12 volts)= 1.0833 amps.
This is a bit less light than a 40W incandescent bulb (much less than a 9-watt CFL bulb, but twice as much as a 5-watt CFL mini-bulb).