0
To connect the battery cables to a 1992 Oldsmobile Cutlass, first ensure the vehicle is turned off and the keys are removed. Connect the positive (red) cable to the positive terminal of the battery, ensuring a secure fit. Next, attach the negative (black) cable to the negative terminal of the battery. Finally, double-check both connections for tightness before starting the vehicle.
What else can I help you with?
What would cause no electrical power on 1997 Cutlass Oldsmobile?
dead battery, blown fusable link, severely cracked or corroded cables. especially check battery ground to chassis and engine.
How do you connect the battery to the coil to start a honda cd175 engine out of the frame and on the bench?
Just connect the battery to the motorcycle battery cables with jumper cables and then start it.
How do you reset the computer on an Oldsmobile Cutlass Supreme?
I have an 89 and you unhook the battery for at least 30 seconds and hook it back up. TRY THIS FOR A 1995 CUTLASS 1) Unhook the positive and negative battery cables. 2) Wait 10 minutes. 3) Press the brake pedal in for 1 second 4) Touch the positive & negative cables together for 3 seconds 5) Hook the both cables to the battery. Start car. Just did today 10-24-209 Another way is to use an OBD reader to reset. This does not work on 96 cutlass using the innavo 3120 model reader from shucks
How do you connect battery charger cables to charge the battery in the car?
You connect the cables BEFORE you plug in or turn on the charger. Positive (red) to battery positive first, then negative (black) to battery ground. Then you turn on your charger and set the timer.
What happens if you connect a car battery backwards?
it will arch out and melt the knobs on your battery and your cables
How do you change the battery cables on a 1997 Nissan pickup?
Disconnect the cables at the 1997 Nissan battery. After following one cable to the other end, disconnect it then pull it out. Feed the new cable in the same way. Connect the non battery end. Do the same for the other cable then connect the cables to the battery.
How do you change battery cables in 1998 Toyota 4runner?
Disconnect the cables at the 1998 4runner battery. Follow the cables to the other ends, paying attention to the path that they follow. One at a time disconnect the cable end, pull it out, then connect the non batter end. Connect the cables to the battery to finish the installation.
Why are your lights flickering on your 2002 Oldsmobile Intrigue?
Check your battery cables. I had same issue
How to replace 91 Chevy blazer battery cables?
disconnect the 91 blazer cables at the battery. One at a time, disconnect the cable at the opposite end, then pull it out. Put the new cable in, routing it the same way, then connect the non battery end. do the same for the other cable, then connect the cables to the battery.
How do you replace battery in 2002 buick regal?
Disconnect the Regal battery cables. Find the battery clamp then remove it. Lift the battery out, then put the new one in. install the clamp, then connect the battery cables.
How do you change the battery on a 1992 Toyota Camry?
disconnect the battery cables. find the battery clamp and remove it. Lift the battery out, then set then new one in place. Install the clamp, then connect the battery cables.
If the battery is not connect right to the post can that cause it to explode?
If you reverse the battery cables, yes the battery can possibly explode.
