That depends on the battery chemistry and is determined by the type of electrolyte used, which can be either an acid, a base, or a salt.
Is a bleach a base
It is acidic.
A battery contains a mixture of around 35% Sulfuric acid and 65% Distilled Water.
Lye (sodium hydroxide) is a stronger base than battery acid (sulfuric acid) in terms of chemical strength and aggressiveness. Lye is highly caustic and can cause severe burns on contact with skin, while battery acid is corrosive but not as immediately damaging.
Battery acid typically refers to sulfuric acid, which is a strong mineral acid and considered as an acid.
Battery chemistry can be either acid or base (alkaline). An alkaline battery is an example of the latter. Those are the critters that are stocked in just about every kind of store there is. Remote controls, flashlights, etc. use them. An automotive battery is generally a lead-acid battery, and that's an example of the former battery type.
Battery acid is an acid. It is typically a dilute solution of sulfuric acid, which is a strong acid.
Wet cell, containing a mixture of sulphuric acid and distilled water.
Wet cell, containing a mixture of sulphuric acid and distilled water.
Battery acid (sulfuric acid) is more acidic than drain cleaner (usually sodium hydroxide or potassium hydroxide) because sulfuric acid has a lower pH value (more H+ ions) compared to the alkaline drain cleaners. This difference in acidity is due to the chemical properties and composition of the acids.
Well, it is elementS....and the battery is a lead-acid base battery....and the battery uses Water (H2O) sulfate (SO4)
Ammonia has a higher pH compared to battery acid, isopropyl alcohol, and water. Ammonia is a base with a pH usually above 11, while battery acid, isopropyl alcohol, and water are either neutral or acidic in nature.