0
To program your universal remote LAX-MAX model LI-Z414 for an Orion TV, you typically need to follow these steps: First, turn on the TV. Then, press and hold the "TV" button on the remote until the indicator light turns on and then off. Next, enter the code for Orion TVs, which can usually be found in the remote's manual or online (common codes include 005, 006, and 007). Finally, press the "Enter" button to save the code, and test the remote to ensure it controls the TV. If it doesn't work, you may need to try other codes.
What else can I help you with?
How do you make your universal remote turn on and off any tv without programming it to the tv?
Universal remotes need to be programmed to the T.V. in order for the remote to work on the T.V.
Can you get the program code for a universal remote from your original remote?
No, the programming code is unique to the manufacturer of the universal remote. It is possible with 'learning' remotes to get the infrared patterns from the original by 'beaming' the codes from the old one to the new one.
Can i use a universal remote on a silo tv?
Yes, you can use a universal remote with a Silo TV, provided that the remote is compatible with the brand. You will need to program the universal remote to recognize the Silo TV by entering the correct code or following the programming instructions specific to the remote. Check the remote's manual for the list of codes and setup procedures.
How do you program a telemania light saber remote?
The Star Wars Luke Skywalker universal remote control uses the same programming set up and codes as the Star Trek Phaser universal remote. I downloaded the PDF and tested it on my light saber remote, works perfect.
What is the code to program a Philips universal remote for a Direct TV DVR Pus box?
There are several sites that offer Philips remote programming instructions. A link is provided.
What are the Sharp TV remote codes for a Motorola universal remote?
Hi Dear, These are the codes fore sharp TV 011,,034,049,058,181,20,216,226
How do you program a ds converter using a rca universal remote?
In programming a ds converter using an RCA universal remote, it is necessary to find the code for the remote. This can be done by turning devices on and pressing search. It will rotate through and stop when the successful setting has been reached. Switch to each additional device that needs to be connected on the remote and perform the same function. This will program all devices to work off the universal remote.
Your power button on your TV broke Is there any way to program a universal remote without the TV being on?
Try running the universal remote programming codes until one works. There should be a sheet of codes that came with the remote. If that doesn't work than chances are that you may have other problems with the TV.
Programming universal remote control theater sistem Panasonic eur7662y30?
please some body can help me por programing my universal control theater sistem the brand is Panasonic and the number is EUR7662Y30
What are the codes for the universal remote NA?
what are the codes for a sanyo universal remote
What is the remote code for Coby 224 DVD player on Dish Network?
The code required for a Coby TV will vary depending on the TV itself and what remote you are programming. Some codes you can try when programming your remote are 505, 607, 625, and 633.
Where do you get a list of universal remote codes?
From the company that built your universal remote. Check their website.
