answersLogoWhite

0

"100 - 240VAC to 12VDC" refers to a power supply unit that can accept an alternating current (AC) input voltage ranging from 100 to 240 volts and convert it to a direct current (DC) output voltage of 12 volts. This type of power supply is commonly used in various electronic devices, allowing them to operate efficiently across different regional voltage standards. The versatility in input voltage makes it suitable for use worldwide.

User Avatar

AnswerBot

1w ago

What else can I help you with?

Related Questions

How can i make a winding of a transformer of an inverter of 12vDC to 240vAc?

850va 12vdc inverter transformer praemari tans


What is the voltage rating for 240VAC?

240 volts alternating current (240vac)


What does 12vdc power mean?

It stands for "12 volts, direct current".


Can you use 12VDC in New Zealand?

Almost all cars in NZ have 12VDC electrics. Most portable generators which produce 230VAC, will also have a 12VDC accessory output for battery charging, etc. There are no general reticulations of 12VDC.


How do you produce 12V adapter?

From what? If you need 12VDC for temporary use, there is a very good 12VDC source in your PC power supply.


How much 12vdc amperage is needed to make 120 vac 9.5 amps?

To convert 12VDC to 120VAC at 9.5A, you will need a minimum of 95A of 12VDC current. This calculation is based on the premise that power remains the same in both systems (P=VI), ignoring inefficiencies and losses in the conversion process.


What is the voltage at car ac compressor?

Most all are 12vdc


How many batteries are in a Voltswagen golf GTI?

One. 12VDC 54AH.


How do you if you have a 12vdc or 24 deep cycle battery?

It should be marked on the battery.


How do you check the fuel solenoid on Briggs 18 hp ohv engine?

Switch the ignition to on. Put your meter to 12VDc. Touch the hot wire going to the solenoid with the meter positive probe . Touch the meter negative probe to ground. If you have 12VDc and you don't hear a click when you turn on the switch, the solenoid is probably bad. If you don't have 12VDc, check fuses and the wire going to the solenoid.


Which device converts 120volt ac from what if your wall to 12vdc for your computer to use?

power supply


What is better a plugin charger with an input of 100-240vac 50-60hz 0.15a output 5.0v0.7a or a phone charger with an input of 100v-240v 0.2a 50hz-60hz an output of 5.0v800ma?

The one with the output of 5v 800ma as this will charge devices quicker and overheat less.