Probably the ON/OFF button.
The button just above green square on the bottom of remote.
To use a classic IRC OD remote for your TV, first ensure the remote has fresh batteries and is compatible with your TV model. Power on the TV and press the "TV" button on the remote to set it to TV mode. Then, press and hold the "Set" button until the red indicator lights up, followed by pressing the "Power" button until the TV turns off. Release the "Set" button, and your remote should now be programmed to control your TV.
It saves you having to walk to the television by clicking a button on the remote to change the channel or volume.
To program the GE RC24914 universal remote for a Toshiba television, first, turn on your TV. Then, press and hold the "TV" button on the remote until the red indicator stays on, then release the button. Next, press and release the "Power" button repeatedly until the TV turns off. Once the TV is off, press the "Enter" button to store the code. If it doesn’t work, you may need to try different codes listed in the remote's manual for Toshiba TVs.
We push button on remote and tv go on.
To program a new remote to a Panasonic TH 37PV60E, first, insert the batteries into the remote. Then, turn on the TV using the power button on the unit. Next, press and hold the "TV" button on the remote until the red LED light turns on, then release the button. Finally, press and hold the "Enter" button until the LED blinks and turns off, indicating the remote is programmed. If it doesn't work, refer to the remote's manual for specific pairing instructions.
I was able to use the code search on a GE 4 function remote, I found the remote for $5 at Big Lots. I started the search with the TV on and let it run until it shut the TV off. Steps I took, press and hold the setup key - then release, press and release the TV button, press and release the power button, after TV turns off then press the #1 button to lock in the code. This remote does almost everything but the sleep button.
Yes, when the word 'remote' is used as a noun, such as the TV remote, it is a common noun, a general word for any remote of any kind.The word 'remote' is also an adjective, a word that describes a noun.
In order to put your DISH Network remote back into "TV Mode," you will simply need to press the clear colored button in the upper left corner of the remote that is labeled, "TV." The button will temporarily light up red & then turn off, after the light goes out you will then have successfully put the remote into TV mode.
i have answered this befor on here remember the remote will not work on combos. combos are TVs with built in vcrs or DVD players. hold down the clear/white tv down till all four white button turn red then press the large power button then press the up channel button once a second when the tv turns off stop pressing the up channel button then press the pound or number button at the bottom of the remote your sat remote will then work the tv press the sat button at the top to work sat
To program your DISH Network remote to your Orion TV you will simply- press and hold the TV Mode button on your DISH Network remote, until all the other mode button back lights illuminate, then release. -Now while the TV mode button is blinking enter in the remote code; 720 which is the remote code for your Orion TV. After entering 720, then press the pound (#) key. -After pressing the # key on the DISH Network remote, the TV mode button should blink 3 times and then turn off completely. This will mean the programming of the DISH remote to your TV has been completed successfully. While still in TV mode try any of the functions on the remote, such as turning the volume up or down on your TV or attempting to press the power button. -The DISH Network remote should now be programmed to control your TV. -If the remote code 720 doesn't program the DISH Network remote successfully you can also try the following using the same procedures, 220, 748, 721, or 062.