0
Easier and no codes are required; do the following:
1. Turn the TV on with your TV remote.
2. On the new remote HDA-IR2, press "Prog" and "TV" buttons at the same time until the red LED is on; release.
3. Press the "TV" button again to start the auto search and aim it towards your TV.
4. The remote will cycle through the stored codes. The TV will turn "off" when the right code is log in. You should imediately press "Prog" to stop the cycling, the code will then be saved in the new remote.
5. Press the "TV" on the new remote; your TV should turn "on". If not start over again..you were slow at pressing the "Prog" to stop the search.
5. Next program the Volume control, Press "Prog" and "TV", release, and press "Vol-" ... new remote will blink twice. This will control your black box volume. You can set the black box to near max and control the volume using the TV volume.
6. Now press "Prog" and "TV", release, and press "Vol+". You now can control the volume of your TV. If the sound is compresse or fuzzy, lower the black box volume.
kaicho8888
What else can I help you with?
What is the remote control code for LG 42pc1dv-AA?
I was able to get my two LG tv's to work using a Goldstar code 1018 (power, volume and mute). Apparently LG used to be Goldstar. Mine was using a Cisco tv remote control unit.
What is the sharp television code for the cisco hda-ir2 remote time warner cable?
To program a Sharp television using the Cisco HDA-IR2 remote for Time Warner Cable, you typically need to enter the appropriate TV code. Common codes for Sharp TVs include 0171, 0051, and 0060, but it's best to consult the remote’s user manual for the exact code. Enter the code using the remote's setup process, which usually involves pressing the "TV" button followed by the "Setup" button and then entering the code. If the TV turns off, the code is correct; if not, try the next code.
What are the vizio universal remote codes for a cisco 8742hdc cable box?
What are the possible universal remote codes for a Cisco 4640 cable box
What was the last lines in the tv series cisco kid?
Hey Poncho, Hey Cisco!
What is the main function provided by Cisco WCS?
The main function served by Cisco WCS or Cisco Wireless Control System is serving as a comprehensive platform to meet the needs of small, medium and large-scale wireless LANS in local, remote, national and international locations.
When was The Cisco Kid - TV series - created?
The Cisco Kid - TV series - was created on 1950-09-05.
When did The Cisco Kid - TV series - end?
The Cisco Kid - TV series - ended on 1956-03-22.
What is the remote control code for Panasonic SC HTB450 on a Cisco AT6400 Alltouch IR universal?
To find the remote control code for the Panasonic SC HTB450 on a Cisco AT6400 Alltouch IR universal remote, refer to the remote's user manual, which typically includes a list of codes for various brands. You can also try common codes for Panasonic devices, such as 0051, 0064, or 0087. If these do not work, you may need to use the code search feature on the remote to find the correct code by cycling through the options.
What is the duration of The Cisco Kid TV series?
The duration of The Cassidys - TV series - is 1800.0 seconds.
What is the Bose remote code for cisco rng150n cable box?
1982
How many Diablos were used in the Cisco Kid tv episodes?
Ten
What television show was first broadcast in color and when?
The Cisco Kid. Commercial color television broadcasting began in 1951, with the first television show filmed and broadcast in color being The Cisco Kid which was broadcast in 1954. The Cisco Kid was on the air from 1950 to 1956, but few Americans were able to see it in color because a color television was much too expensive for most people.
