0
What else can I help you with?
What voltage must the battery supply?
depends on the kind of battery. a regular battery (aa,aaa,d,c) should supply 1.5 volts. a car battery should supply 12 volts
How do you set up a phantom power supply for a condenser microphone?
To set up a phantom power supply for a condenser microphone, first ensure that the microphone is compatible with phantom power (typically 48V). Connect the microphone to the input of the phantom power supply using an XLR cable. Then, connect the output of the phantom power supply to your audio interface or mixer, also using an XLR cable. Finally, turn on the phantom power on the supply to provide the necessary voltage for the microphone to operate.
How much voltage does an automobile battery usually supply?
when in good working condition an automotive battery should supply between 12.6 and 13.8 volts
What is voltage divider circuit?
The two resistor voltage divider is used often to supply a voltage different from that of an available battery or power supply. In application the output voltage depends upon the resistance of the load it drives.
Does miliamperes increase as does battery voltage when put in a series configuration?
The current in a circuit, expressed in milliamperes, is1,000 x (battery or power supply voltage)/(resistance connected between the power supply terminals)If you increase the voltage of the battery or power supply, the current in the circuitincreases proportionally, at least until something in the circuit gets hot, melts, fuses,and opens the circuit.
How do you find open circuit voltage in circuit?
"Open circuit voltage" is a characteristic of a battery or power supply. You measure it exactly as the term suggests ... disconnect any load from it (or open the ON/OFF switch), and measure the voltage across the terminals of the battery or power supply while it's not supplying current to anything.
What kind of power supply is needed for a wireless mic?
The power supply that is needed for a wireless microphone would be a rechargeable battery. Batteries such as these could be purchased at Amazon or Full Compass.
What parts are needed to create a circuit?
A basic electrical circuit needs a voltage supply (battery or household outlet), wiring to carry electrons to and from the voltage supply to the load, and a load (motor, light, heat element, stereo, blender, whatever).
Can you use a 2 amp supply on a 1.5 amp WD External Drive?
If it's a "clean" power supply with the proper voltage, it shouldn't be a problem.
What jobs dose a battery do in the circuit?
The purpose of the battery in a circuit is to wive energy to the circuit
Why can't you use a multitester as an ohmmeter if it has no battery?
The battery is used by the meter to apply a voltage across the resistance being measured and determine the current which determines the resistance. If there is no battery it can't supply the voltage and can't measure current, so no reading.
A device that creates a potential difference in an electric circuit is?
It is called power supply or battery.
