0
What else can I help you with?
What can you use to check the voltage of a battery?
Voltmeter or multimeter.
How do you reset the check engine light on a 2002 Chrysler Sebring?
You can unhook the battery or use a scan tool.You can unhook the battery or use a scan tool.
How to reset the check engine light on a dodge caravan?
Fix the cause, use a scan tool, or unhook the battery.Fix the cause, use a scan tool, or unhook the battery.
How do you wire a boat winch do I use the truck or Boat Battery?
truck battery Check the specifications on the winch to find its voltage and amperage.
Is a battery dead if it bounces?
No, a battery is not necessarily dead if it bounces. The bounce test is not a reliable way to determine if a battery is dead or not. It is best to use a battery tester or multimeter to check the voltage of the battery.
How do you reset the check engine light on a 2002 Jeep Liberty?
You can unhook the battery or use a scan tool.
Why is the measured voltage of a battery not the same as the stated voltage?
The measured voltage of a battery may not match the stated voltage due to internal resistance, temperature, or the age and condition of the battery. These factors can lead to voltage drops when the battery is in use.
How many hours does a lawn mower battery have to be on a float charger?
A battery float charger is intended only to keep a fully charged battery from losing its charge. It will NOT work to charge a battery that is discharged or damaged. Check the voltage of the battery to be charged. Do not use charger if the battery voltage is less than 9.6 volts.
How do you find a shorted wire current draw with the key in the off position if you know which main fuse is involved on a 94 S-10 Blazer?
You need to do a parasitic draw test. Use a voltmeter to check base voltage of battery. Then crank the engine, check voltage at battery. It needs to be at least two more volts than previous base voltage. Then apply a load or turn on headlights. The voltage should not drop over one volt. Ideal base voltage at battery terminals is 12.6, ideal charging voltage would be 14.6, ideal loaded voltage would be 13.6 volts aproximately. If you find a drainage in system and you have a good battery, then you need to check radio and main accessories first, then check door latch switches and courtesy dome lamps. You need to do a parasitic draw test. Use a voltmeter to check base voltage of battery. Then crank the engine, check voltage at battery. It needs to be at least two more volts than previous base voltage. Then apply a load or turn on headlights. The voltage should not drop over one volt. Ideal base voltage at battery terminals is 12.6, ideal charging voltage would be 14.6, ideal loaded voltage would be 13.6 volts aproximately. If you find a drainage in system and you have a good battery, then you need to check radio and main accessories first, then check door latch switches and courtesy dome lamps.
How do you reset the check engine light on a 2001 Chrysler Town and Country?
You can use a scan tool or unhook the battery.
How do you reset the computer for 1989 Chrysler lebaron?
You can use a scan tool, or unhook the battery.You can use a scan tool, or unhook the battery.
How do you reset a computer in a 2008 Chrysler Sebring?
You can use a scan tool or unhook the battery.You can use a scan tool or unhook the battery.
