answersLogoWhite

0

For performance reasons, a Hard Drive and CD-ROM drive should be on separate IDE channels. This is because both drives on one channel will share bandwidth, making them run at only half the speed if both drives are active at once (i.e. installing a program from CD-ROM). Both drives should be configured as "Master" drives (according to the jumper cables), since they will both be the master for their respective channel.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Is a CDROM drive an input or output device?

A CDROM drive is neither an input device or an output device. A CDROM drive is a storage device.


If a motherboard has two IDE channels how many IDE devices can be accomodated?

Each IDE connector on the board supports two channels per. (Two drives) The combination of drives can vary. For instance, hard drive-cdrom, hard drive-hard drive, cdrom-cdrom, ect....ect.


When installing a hard drive and a CD-ROM drive on the same IDE channel which do you configure as the master and which as the slave?

Configure the hard drive as the master and the CD-ROM as the slave.


When installing a hard drive and a DVD writer on the same IDE channel which do you configure as the master and which as a slave?

Hard drive as master and DVD writer as slave.


How do you remove CD drive from dell inspiron 2200?

Flip the laptop over so that the rubber feet are facing up. Remove the screw in the center of the laptop with the picture of a lock near it. This is the only thing keeping the cdrom drive from sliding out of the laptop. If it doesn't come out easily, you may need to power up the laptop, open up the cdrom tray, power off the laptop (while the cdrom tray is still open) then repeat procedure above - however, you'll now have the cdrom tray to use as a handle to pull out the entire cdrom drive.


When installing a hard drive and a CD-ROM drive on the same IDE channel which do you configure as the master and which as a slave?

The Harddrive needs to be set as "master" and the CD ROM as Slave.


What information stays on a computer after removing the harddrive?

None, unless you leave a disc in the cdrom drive.


How do you mount CD drive in SCO open server unix?

To mount a CD in SCO Open server UNIX: login as root make a directory named cdrom then # mount -f HS,lower /dev/cd0 /cdrom


How do you reformat your XP hard drive when your CDRom has a virus and won't work?

CDROM drives do not get infected with virus. May be there is a driver problem. You can first run one of the free anti-virus like AVG and enable your CD ROM drive if you want to reinstall OS from a CD/DVD. - Neeraj Sharma


Which technology is used in a CDROM Drive ?

To read CD-ROM's, the technology in a CD-ROM drive is an optical disc drive (ODD). It typically utilizes light to retrieve information on a disc.


What is an internal DVD drive?

A CD, DVD or Blu-ray drive (optical drive) that is installed in the computer.The alternative is an external drive, which is a separate box you connect to the computer using a USB cable.


How do you reinstall something that just deleted on your computer?

Normally you put the original installation CD in the CDrom drive and re-install the program.