0
What else can I help you with?
How do you connect a stereo RCA phono cable from your turntable to a 3.5 mm line in can this even be done?
A 3.5 mm input is a line level signal, and a turntable has a phono level signal. You can connect these, but you will need a phono preamp to go in between the two. An RCA cable plugs into to the preamp from the turntable, and an RCA to 3.5mm cable connects the preamp to the stereo.
Can you plug a turntable into an auxiliary input jack?
Yes, you can plug a turntable into an auxiliary input jack, but you will need a phono preamp or a turntable with a built-in preamp. Standard auxiliary input jacks expect a line-level signal, while turntables output a lower-level signal that requires amplification. If your turntable does not have a built-in preamp, using an external phono preamp will ensure proper sound quality and volume.
What can one do with a Phono cartridge?
A phono cartridge or magnetic cartridge is actually a transducer or converter. With it, you can play gramophone records on a phonograph or a turntable.
I connected my Pyle pro plttb1 turntable to my samsung ht-ds610 and it was extremely quiet. I tried a CD and it was fine. Why was the turntable so quiet?
That receiver almost definitely does not have a "phono" input. This is a special input that was on older receivers that provided much more amplification than a "CD", "Tape", or "AUX" input. It also applied special "RIAA Equalization" to the signal so that the records would sound right. You need to buy a "phono pre-amp" in order to connect your turntable to your receiver. They are available at most audio/video stores. You simply plug the turntable into the into the pre-amp's input and then connect the pre-amp's output to an unused input on your receiver (eg. "CD", "Tape in" or "AUX").
Could a phono drive be used as an amplifier for a mixing desk?
It's not clear what you mean by "phono drive". If you are asking about using a phono preamp as a microphone or instrument preamp and sending the output of the preamp to the mixer, you will find that the phono preamp has two problems:First, it does not have anything close to flat frequency response. Phono preamps are designed with a strong equalization curve, which compensates for the EQ that is used when high-fidelity recordings are mastered. You will get lots of bass and no highs if you try to run a mic or instrument signal through a phono preamp.Second, you may find that it does not have a lot of headroom. A phono preamp is sensitive and a microphone or instrument could drive it into saturation.For the same reasons, you certainly cannot use a phono preamp as a line-level amplifier in a mixer.If you happen to be asking if you can use a Mod Squad or McCormack Phono Drive as a preamp for a turntable and run the output of the Phono Drive (as line level) into a DJ mixing desk, then the answer is yes, that should work quite nicely (even though the Phono Drive is, in my opinion, an absurdly overpriced piece of gear).
How do you abbreviate phono?
Phono is already an abbreviation, for phonograph.
What is the abbreviation for phonograph?
The abbreviation for phonograph is "phono."
When was Phono-Comb created?
Phono-Comb was created in 1999.
When did Phono-Comb end?
Phono-Comb ended in 1999.
Is there a stereo system that allows me to use my MP3 player and has a turntable?
The Numark PT01USB Portable DJ Turntable with USB Connection is what you need.
Do you need the bundle to play dj hero?
no, you just need the game and the turntable
What is the best turntable for portability?
T.90 USB TURNTABLE is the best turntable for portability
