There is a spring inside the CD ejection (the CD ejection isn't powered by electrics, but by pressure) hope i could help :)
how do you turn on a walkman portable cd player
when you copied CD-r did u close the the CD when you finished if CD is not closed in program while recording, it will cause ejection problems as the player cannot read that the CD is finished
Make sure power is on to the unit then select CD
Maybe there is a messed up mechanism inside of the CD player that causes it to turn on by itself. If that is the case, then it probably can't be fixed:(
I've had that happen to my Isuzu Ascender. The thing that worked for me was turn car off and remove key find the fuse to the radio/CD player and pull it out turn car on for a second (radio & CD player will not turn on at all because the fuse is out) put the fuse back in turn car on- hopefully you can eject the CD now.
To remove a CD from the CD player in a 2003 Toyota Matrix, first turn on the car's ignition. Press the "Eject" button on the CD player; the CD should slide out. If the CD does not eject, you may need to turn off the car and try again or consult the owner's manual for troubleshooting steps. If the CD is still stuck, consider disconnecting the car battery briefly to reset the player.
If you have a CD player with a resume mode, all you have to do is turn on the resume function, usually on the back of the CD player, and then after you stop the CD, all you have to do is press play again.
older factory CD player don't have the programming to play burned cds. try replacing the player
you do not start it untell it is on
You press. Source. to start up your CD player. Then press. Off. to turn it off
You need to turn the battery off and then disconnect the stereo. You can then connect the new CD player on the same wires.
TO MAKE SURE GO TO iTUNE'S AND CHECK IF THE SONGS ARE IN THE MP3 FORMAT THEN TRY IT THAT IS WHAT I DID AND IT WORKS NOW