Its unlikely that it is related to getting a new battery. Make sure that during the process of replacing the battery that any emissions hoses or wiring were not disturbed or disconnected.
Battery size is measure in 2 ways. The actual physical dimensions of the battery and the size in Cold Cranking Amps (CCA). Purchase a battery that is physically the same size as the battery you are replacing or it will not fit. You can purchase a battery with a higher CCA capacity than the one you are replacing. This will cause no problems at all, and will just be a better battery, especially in the winter.
The PLIP battery on the Peugeot 307 means that the battery is in need of charging. It can also mean there is a problem with the battery cables or the battery needs to be replaced. Not replacing the battery when necessary can also cause problems for the alternator.
The same way you started it before replacing the battery.
The battery light indicates that the battery is not receiving a charging current. You may have a bad alternator or a broken drive belt (if you have a broken belt you'll have overheating and power steering problems too, though).
poor earth from battery to body work, low battery or starter motor needs replacing. are the most common problems
my battery is still on after changing battery and altnator
If your 1995 Geo Tracker won't start, it could be due to several common issues such as a dead battery, faulty starter, or fuel system problems. First, check the battery connections and ensure the battery is charged. Next, listen for any clicking sounds when turning the key, indicating a possible starter issue. Lastly, consider checking the fuel pump and fuel filter to ensure that fuel is reaching the engine.
Some common electric bike problems include battery issues, motor malfunctions, and electrical wiring problems. These can be resolved by checking and replacing the battery, inspecting and repairing the motor, and fixing any loose or damaged wiring. Regular maintenance and proper care can help prevent these issues from occurring.
If your fire alarm is still beeping after replacing the battery, it could be due to a few reasons such as a faulty battery, improper installation, or a malfunction in the alarm itself. It's important to check the battery connection, ensure it is the correct type of battery, and if the issue persists, consider replacing the alarm unit.
The alternator is probably bad. That is what recharges your battery
Follow the pos battery cable.
check starter