answersLogoWhite

0

No, you could use a GFCI circuit breaker instead.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

Where does a GFCI go?

A Ground Fault Circuit Interrupter (GFCI) should be installed in areas where water is present, such as kitchens, bathrooms, outdoor outlets, and garages. It is important to have GFCIs near sinks, showers, and other water sources to prevent electric shocks.


Where must GFCI receptacles be installed in residential garages?

All receptacles in a garage must be GFCI protected by code. Typically, the first receptacle in the circuit (location is irrelevant) must be a GFCI, then all others down stream in the circuit will be protected, and can be common receptacles.


Where are receptacles required?

Receptacles are required in all habitable rooms, including bedrooms, living rooms, kitchens, and bathrooms. They are also required in hallways, stairways, and outdoor areas. Building codes dictate the specific locations and number of receptacles needed in a dwelling based on the square footage and layout of the space.


What are the exceptions of having GFCI protection?

GFCI protection is typically not required in certain areas, such as non-dwelling unit garages, unfinished basements, and outdoor receptacles that are not readily accessible. Additionally, some specific appliances, like refrigerators and freezers, may not require GFCI protection if they are in a dedicated circuit. It's also worth noting that GFCI protection is not mandated for areas like kitchens or bathrooms if there are no outlets within six feet of a sink. Always refer to local codes and regulations for the most accurate guidance.


What might happen if the line and load connetions of a feedthrough gfci receptacle were reversed?

Most probably the receptacles downstream from the GFCI would not be protected by the GFCI receptacle.


Can you feed multiple outlets to one GFCI outlet near the sink?

code states that if a water source such as a sink is within 6 feet of a receptacle, that recetacle (s), must be protected by a GFCI receptacle. I believe the actual distance is 5 feet. Please forgive me if I'm wrong. But the NEC also requires that ANY counter top receptacles in a kitchen and receptacles ANYWHERE in a bathroom must be GFCI protected. More directly to your question, ordinary receptacles can be protected from a GFCI receptacle if properly wired. They are designed to do that. It is a way to save money. You may also consider a GFCI breaker if you have many receptacles to protect. I was told once that there is a limit of 3 "piggy backed" receptacles per GFCI but I have never seen that in the NEC.


Where are gfci outlets required?

GFCI receptacle's must protect any outlet that is within 6 feet of a water source, outside the home, in a garage, on a deck, in a sunroom, in a bathroom, unfinished basements, kitchens, & crawl spaces.


How do you install multiple GFCI receptacles?

A GFCI receptacle can extend its protection to regular receptacles connected to the output side of the GFCI. Each actual GFCI receptacle should be directly connected to a breaker in electric panel.


Do gfcis protect receptacles upstream or dowstream?

Ground Fault Circuit Interrupters (GFCIs) protect downstream receptacles. This means that any electrical devices or outlets connected after the GFCI in the circuit are protected from ground faults. If a ground fault occurs, the GFCI will trip and cut off power to all downstream devices, helping to prevent electric shock. However, it does not provide protection to receptacles located upstream of the GFCI.


Gfci outlet feels warm to the touch?

It is normal for GFCI breakers and receptacles to feel warm to the touch while under load. They should not feel "hot". GFCI receptacles often protect other receptacles further down the line, so the load does not necessarily need to be plugged into the GFCI receptacle itself. AFCI breakers will also feel warm to the touch. Again the receptacles should not feel "hot". If they are hot or heat discolored, you should discontinue use and call a licensed electrician. C. P., Master Electrician


Does a microwave have to be plugged into a GFCI outlet?

It is not required for a microwave to be plugged into a GFCI outlet, but it is recommended for safety reasons, especially in locations like kitchens or bathrooms where there may be water present. GFCI outlets help protect against electrical shocks in wet environments.


Where is a GFCI not needed?

In rooms without exposure to water such as a bedroom or living room. Typically, GFCI is used in bathrooms, kitchens, garages, outdoors and sometimes basements.