Diesel is a different grade of kerosene and will work. You may need to change the nozzle so it burns clean.
Typically cars either burn gasoline or diesel fuel if the engines are equipped to burn that. Kerosene is normally not used in a diesel but it will function in an emergency just as well as diesel fuel except that the injection parts will not receive much lubrication. But it will get you home in a pinch. If your question is can you use #2 diesel in a wick type kerosene heater then no. Diesel fuel will smoke and stink compared to kerosene. If your question is can you use #2 diesel in a kerosene heater that is like a salamander, then maybe. I use #2 diesel in my salamander and it works fine and heats my garage up ok. Kerosene does burn cleaner though.
The SX-B21 Kerosene Heater has a wick that is located at the base of the heater. When changing the wick out always be sure to pour out any kerosene that may be left in the lamp.
how do you replace a kerosene heater wick for a kerosun omni230 heater?
A kerosene heater has a wick made of fiberglass that is connected to a kerosene tank. When the wick is lit, the kerosene keeps the wick burning, and a convection unit in the heater uses the flame to heat the air. In some kerosene heaters, there is a fan to blow the heated air into the room to heat it faster.
ANSWER:Normal diesel fuel should not be burned in a kerosene heater, because there are many more contaminants in it, such as sulfur. A 100% solution of Biodiesel will not work because it requires a much higher initial temperature (300F) to burn cleanly. Blends of these fuels with kerosene can be burned, but there may be problems with the fuel soaking up the wick properly in the case of Biodiesel, which can lead to wick burning and sooting. There may also be problems lighting and burning properly if the blend contains too much of the Biodiesel, as its flash point is higher than kerosene. Diesel/Biodiesel fuel can also be run in many forced air heaters along with kerosene.
The lifespan of a kerosene heater wick typically ranges from 100 to 500 hours of use, depending on factors like the quality of the wick, the type of kerosene used, and maintenance practices. Regular cleaning and proper adjustments can help extend the wick's life. It's also important to replace the wick when it shows signs of wear, such as uneven burning or excessive smoke.
To replace the wick on a Corona kerosene heater follow the instructions on many YouTube videos. There is no one way to change all the models that there are.
To replace a Turco wick in a kerosene heater, first ensure the heater is turned off and cooled down. Remove the burner assembly by unscrewing it from the base, then take out the old wick carefully. Install the new wick by sliding it into the wick holder, making sure it aligns properly, and reassemble the burner. Finally, refill the kerosene tank and test the heater to ensure it's functioning correctly.
To replace the wick in a Kero-Sun Omni 230 kerosene heater, follow these steps: 1. Remove the burner unit from the heater. 2. Open the wick cover and take out the old wick. 3. Insert the new wick, making sure it is positioned correctly and trimmed to the proper length. 4. Close the cover and reinstall the burner unit back into the heater.
To change the wick on a Koehring GC19A kerosene heater, first ensure the heater is turned off and completely cool. Remove the fuel tank and take out the old wick by unscrewing the wick adjustment knob and pulling it out gently. Install the new wick by threading it through the wick holder and securing it in place, then reassemble the heater and fill the tank with kerosene before testing it. Always consult the manufacturer's manual for specific instructions and safety guidelines.
If you are referring to a kerosene space heater, it can be used with diesel fuel, but it ill give off a very strong odor, and the wick will become clogged much faster. If you are referring to a house furnace fuel tank, then yes. The fuel found in most home "oil" furnaces is the exact same thing as off-road diesel.
It depends on the kerosene heater brand. google the name brand then look on their website for owners manuals it should tell you.