0
Yes you can! It is kind of strange that someone says no, as the instructions and the book I got with mine say it works fine. The book is called Dadgum thats good. There are recipes for crab boil and other things in it.
What else can I help you with?
Why is water dangerous in a deep fat fryer?
Never fill the fryer more than half-full with oil (or melted fat) - and NEVER leave it on the stove unattended !
Cleaning Your Deep Fryer?
Deep fryers can save a great amount of time for any cook, so it is important to take proper care of them in order to ensure a long-lasting product life and make food taste great every time. The following tips will help you keep your deep fryer in the best condition possible and will guarantee that everyone will be satisfied with how the food tastes.After use, unplug your deep fryer and allow the oil to cool. Drain all of the oil out. If you plan on reusing the oil, pour it into a coffee can and seal. If your deep fryer comes with a basket, remove it and wash separately. Using a plastic spatula, carefully scrape down the sides of the deep fryer in order to remove all food and oil that has caked on. Remove all of the scrapings from the bottom with a paper towel.Using the regular oil level as your guideline, fill the deep fryer with clean water and add a small amount of dish washing soap. Plug it in and wait for the solution to come to a boil. After 15 minutes, unplug the deep fryer and wait for the soap solution to cool.Drain out the water from the deep fryer. If any oil remains stuck to the sides, you can use baking soda to scrub it away. Make a paste by mixing a small amount of water with baking soda, and use a sponge to rub the paste on the surface using a circular motion. The baking soda paste can also be used to remove any stains on the outside of the deep fryer.If you have any old stains from oil being left in the deep fryer for too long, you can make them fresh again by spraying with WD-40. If you needed to use this step, take extra care when rinsing the deep fryer to ensure that none of the chemicals are left on the surface.Mix a solution of nine parts water and one part vinegar, and use that to rinse the appliance. Finally, rinse the deep fryer with pure water and dry thoroughly using paper towels or a clean cloth. Never submerge your deep fryer in water, as this can cause irreparable damage. If any of the electric parts have gotten wet, allow them to air-dry completely before use.
What can you use to replace a deep fat fryer for making fried dough?
You can use any deep pot on the stove top. Be sure you don't fill the pot more than half full. You'll also want a cooking thermometer to check the temperature of your oil since you won't have the thermostat from the deep fryer.
How do you properly boil water in a pan?
To properly boil water in a pan, fill the pan with water, place it on a stove over high heat, and wait for the water to come to a rolling boil. Once it reaches a boil, reduce the heat to maintain a gentle boil until the water is ready for use.
How much water to fill a 21' round pool?
If you fill it to four feet deep, the total is 10,408 gallons of water.
How do you hard boil an egg?
First you put as many eggs as you want to boil into the bot but only one layer of eggs (don't stack them) then fill the pot with water and fill so there is about an inch of water above the eggs. start boiling and after about 12 minutes remove it from the stove. drain the water and refill with warm water. Empty again and fill with cold tap water.
How can I safely boil water in a cup?
To safely boil water in a cup, fill the cup with water and place it in the microwave or on a stovetop. Heat the water in short intervals, stirring in between, until it reaches a rolling boil. Use caution when handling the hot cup to avoid burns.
How much chicken can you fry in a 1 liter deep fryer?
The amount of chicken you can fry in a 1-liter deep fryer depends on the size and cut of the chicken pieces. Generally, you should fill the fryer no more than halfway to allow for proper cooking and to prevent overflow. This typically means you can fry about 200-300 grams (7-10 ounces) of chicken at a time, depending on the pieces. Always ensure that the chicken is fully submerged in the oil for even cooking.
How many gallons of water does it take to fill 18x36 pool?
That will depend on how deep you want the water to be.
13300 gallons of water can fill?
13300 gal of water can fill WHAT? 13,300 gallons of water will fill a 14'x28' pool that's 3 1/2' to 8 1/2' deep.
How do you properly boil a pot of water for cooking pasta?
To properly boil water for cooking pasta, fill a pot with water, add a pinch of salt, and place it on high heat. Wait for the water to come to a rolling boil, then add the pasta and stir occasionally. Cook the pasta according to the package instructions, then drain and serve.
How Boil water?
To boil water, fill a pot with water and place it on a stove over high heat. Wait until bubbles start to form and the water is rapidly boiling. You can tell the water is boiling when steam starts to rise from the surface.
