Yes, you can replace a 165 VAC capacitor with a 220 VAC capacitor, as the higher voltage rating means the 220 VAC capacitor can safely handle the voltage without risk of failure. However, ensure that the capacitance value (measured in microfarads) is the same or compatible with the circuit's requirements, as using a capacitor with a different capacitance can affect the circuit's performance. Always check for physical size and mounting compatibility as well.
Yes, generally, all other things being the same. By all other things I mean the capacitance, the type of capacitor for the application, etc.
You can always use a higher voltage rated capacitor, it will probably just last a little longer.
If the motor is rated at 370 v and the supply is 370 v, the capacitor needs to be rated at 370 or more volts, so a 440 v capacitor will be OK.
Maybe if the voltage across capacitor will never exceed 450 VAC.
220 VAC stands for 220 Volts Alternating Current. It represents the voltage and type of electrical current commonly used in residential and commercial settings for powering various devices and appliances.
A 220 VAC breaker can be single pole or double pole depending on the application. For standard 220 VAC circuits like most household appliances, a double pole breaker is typically used. However, in certain situations where only one hot wire is needed, a single pole breaker can be used for 220 VAC circuits.
They are in tandem because they power a 220 VAC circuit, rather then a 110 VAC circuit.
Dubai uses 220 VAC at 50 Hz (in the USA, we use 120 VAC at 60 Hz). They also use the G type plug.
The difference is that the 440 vac capacitor has a 70 volt-amp-current higher output than the 370. Capacitors must always be replaced with the same size micro-farads or you'll damage the device, such as a motor. The vac rating can be changed with a capacitor with a higher rating but not lower. Example: 15mfd at 370vac can be replaced by a 15mfd at 440vac, but not the opposite.
No, a device designed to work on 50 Hz/60 Hz at 120 VAC will not work on 220 VAC without a voltage converter or transformer. The difference in voltage can damage the device and may not function properly. Always ensure that the device is compatible with the voltage and frequency of the power supply before connecting it.
Sure if it fits and meets other specs like operating temperature.
The standard voltage is the Republic of Ireland is 220 VAC at 50Hz.