Personally, I wouldn't recommend using CLR in the dishwasher unless you live in an area with extremely hard water and don't have a water softener. If this is the case, Jelmar (the manufacturer of CLR) recommends using 1/2 cup CLR once the empty dishwasher is at least half filled with water.
It's not recommended to use CLR in a dishwasher as it can leave behind chemical residues that may be harmful if ingested. It's better to use dishwasher-specific cleaners or vinegar for cleaning and descaling your dishwasher.
yes
NO! CLP, yes. CLR is a strong acid that is meant for cleaning toilets and sinks. It will corrode a gun.
Use CLR and a scrub brush
CLR cleaner is not recommended for use on nickel as it can cause damage to the finish. It is best to use a cleaner specifically designed for nickel surfaces to ensure it remains safe and undamaged.
To use CLR (Calcium, Lime, and Rust Remover) in coffee makers, first dilute the CLR solution with equal parts water according to the manufacturer's instructions. Pour the mixture into the water reservoir of the coffee maker. Run a brew cycle without coffee grounds, and then follow up with several cycles of plain water to thoroughly rinse out any remaining CLR. Always check your coffee maker's user manual before using CLR, as some manufacturers may advise against it.
This is not a recommended use for CLR. People have done this and report no adverse result's, but I would not.
Honestly? No need to bother - just get some CLR and use that.
soak it in CLR for awhile, then use an old toothbrush to scrub off the lime you can get CLR at any grocery store, in the laundry soap aisle
CLR is a common choice for cleaning mineral deposits in household appliances, but it is not recommended for use in steam irons. The chemicals in CLR can be harsh and may damage the internal components of the iron. It is best to use a mixture of water and vinegar or a specifically formulated iron cleaner to clean the reservoir of a steam iron.
It depends exactly what is in that well water, but generally I find CLR works very effectively .It depends exactly what is in that well water, but generally I find CLR works very effectively .
To effectively use CLR in the toilet tank to remove stubborn stains and mineral deposits, first, turn off the water supply to the toilet. Flush the toilet to empty the tank. Pour CLR directly into the tank and let it sit for at least 10-15 minutes. Scrub the tank with a toilet brush to help loosen the stains and deposits. Finally, turn the water supply back on and flush the toilet to rinse out the CLR. Repeat the process if necessary. Remember to follow the instructions on the CLR bottle and wear gloves and eye protection when handling the product.