How can you find instructions to make a built in dishwasher?

Answer 1

You first feed in the water supply line from the valve which should be in the kitchen sink compartment. I would highly recommend buying a SS braided hose instead of copper or plastic line. These cost about $10 in Home Depot. Connect this line onto the inlet valve, usually under front left corner as you face it (opposite side to electric box) Next, you move the machine close to the space and thread the drain pipe into the sink compartment, being sure not to kink it. -Now as someone pushes the D/W into place, someone else pulls the drain line through enough to hook onto the drain stub on the sink drain. If there isn't one , you will have to buy an ABS fitting with this and fit it into the drain system. Last, reach under the D/W and pull the electric wire through to wire in at the box, which is always just under the front. Don't forget to put a wire clamp on .