answersLogoWhite

0

Mean Green. You can actually buy this at Wal-Mart or Dollar Store in your area. Wet your cleaning cloth and spray the door and watch the dirt and dinge melt away. Works wonders but DO NOT BREATH THE FUMES. Good luck. Clorox 2 full strength works without the fumes.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How can I replace the bottom door seal on my refrigerator?

To replace the bottom door seal on your refrigerator, follow these steps: Purchase a replacement door seal that matches the make and model of your refrigerator. Open the refrigerator door and locate the screws holding the current seal in place. Use a screwdriver to remove the screws and take out the old seal. Clean the area where the new seal will be installed. Align the new seal with the door and secure it in place with the screws. Close the door to ensure the seal is properly aligned and making a tight seal. This process will help maintain the efficiency of your refrigerator by preventing cold air from escaping.


How to clean refrigerator gaskets?

if they come out, use a sink Otherwise I like "Mean Green" and a rag.


Which glue product works instantly on refrigerator door seal?

Super glue.


Why does the refrigerator door not close properly?

The refrigerator door may not close properly due to a misaligned seal, a dirty or damaged gasket, or an obstruction preventing it from fully closing.


How does refrigerator door work?

Refrigerator door works with the help of magnets which are attached behind the rubber seal on the door which attracts to close the door and doesn't open without any force Maheshwari - VI - Sri Aurobindo International School, Hyderabad


How often should I schedule a door seal replacement for my refrigerator to ensure optimal performance and energy efficiency?

It is recommended to schedule a door seal replacement for your refrigerator every 5 to 7 years to maintain optimal performance and energy efficiency.


How can I change the shower door seal?

To change the shower door seal, first remove the old seal by pulling it off the door. Clean the area where the seal was attached. Measure and cut the new seal to fit the door. Attach the new seal by pressing it onto the door. Make sure it is securely in place.


How can I effectively replace the exterior door seal at the bottom of my door?

To effectively replace the exterior door seal at the bottom of your door, follow these steps: Measure the length of the door seal needed. Remove the old door seal by pulling it out of the track. Clean the track and the bottom of the door. Install the new door seal by sliding it into the track. Trim any excess seal if needed. Test the door to ensure a proper seal.


How can I install a door seal at the bottom of a door?

To install a door seal at the bottom of a door, follow these steps: Measure the width of the door and cut the door seal to fit. Clean the bottom of the door to ensure a smooth surface. Attach the door seal to the bottom of the door using screws or adhesive, making sure it is aligned properly. Test the door to ensure the seal is working effectively in preventing drafts and keeping out noise.


How can I effectively repair a refrigerator door gasket using a refrigerator door gasket repair kit?

To effectively repair a refrigerator door gasket using a refrigerator door gasket repair kit, follow the instructions provided in the kit carefully. Clean the area thoroughly before applying the repair material, and ensure a tight seal by pressing the gasket firmly into place. Allow the repair to set according to the kit's instructions before using the refrigerator again.


Why does a magnet stick to a refrigerator door?

Metals with magnetic properties can be applied in this case. Magnets are often used along the edges of refrigerator doors, as they can produce a tight seal with the opening of the refrigerator. This way, there will be less heat gain into the refrigerator compartment and would save energy needed for the coolers.


How can I replace door seals effectively?

To replace door seals effectively, first remove the old seal by pulling it off the door. Clean the area where the seal will be placed. Measure and cut the new seal to fit the door. Press the new seal firmly into place, making sure it is secure. Test the door to ensure a proper seal.