I'm not sure that you can, unless you are a blacksmith or metalist.
MB advice
That depends on the severity of the dent. A minor dent could be removed by a paintles dent removal specialist for less than $100. A major dent could involve replacing sheet metal and over $1000.
It will cost between $50 and $100 to fix a small dent in the wall, if you hire a carpenter. An individual can fix the small dent in the wall for less than $20.
form_title=Find A Paintless Dent Repair Shop form_header=Fix dents in your vehicle by using a trusted repair shop. What caused the damage?=_ Will your insurance cover the repair?= () Yes () No Is the repair to be made on metal or fiberglass?= () Metal () Fiberglass () Other
boil it in water, the dent should rise back up unless there is a crack
To fix a dent in drywall, you can use a putty knife to apply spackling compound to fill the dent. Smooth it out, let it dry, sand it down, and then repaint the area to match the rest of the wall.
To fix a dent in a wiffle ball, you can try gently heating the area with warm water or a hairdryer on low heat to soften the plastic. Once it's warm, carefully press the dent from the inside out with your fingers or a small object to reshape it. After reshaping, allow the ball to cool and harden back into its original form. If the dent persists, replacing the ball may be the best option.
To fix a dent in the wall, you can use a putty knife to apply spackling compound to fill in the dent. Smooth it out and let it dry before sanding and painting over the area to match the rest of the wall.
sommething gose here
form_title= Paintless Dent Repair Tools form_header= Fix dents in your car easily. What color is your car?*= _ [50] Where is the dent?*= _ [50] What is the size of the dent?*= _ [50]
try pop a dent or if you can get it out with that try a rubber mallet if you can get to the back side of it
It might get rusty if you but it in hot water...
A bent car door can be fixed by using a dent puller. It attaches to the dent via a suction cup which allows the dent to be readily popped out.