If they have not changed from the '89, then take off the glove box door. Its there. Just remove all the small screws then pull it out.
The 1988 Ford Tempo fan regulator can be found on the fan hub. The fan regulator is attached to the fan hub with two retaining screws.
Hi their should be a diagrahm on or around the fan shroud
To replace the fan motor relay on a 1994 Ford Tempo, first, locate the relay in the fuse box, typically found under the hood. Disconnect the battery to ensure safety, then remove the relay by pulling it straight out of its socket. Insert the new relay by aligning it correctly and pressing it firmly into place. Finally, reconnect the battery and test the fan operation to ensure everything is working properly.
The 1996 Ford Thunderbird fan relay switch is attached to the electric fan motor. The fan motor is attached to the fan blades.
Its prob the radiator fan. Or you are out of coolant.
How to remover 1996 ford mustang radiator fan from the radiator motor
Disconnect the fan motor electrical connector. Unbolt the fan bracket and shroud assembly. Take the harness connector from the shroud. Lift the shroud out of the engine compartment. To separate the fan from the motor take loose the motor shaft clip. Remove the bracket from the fan motor by detatching the harness from the retainers then remove the mounting screws.
This will cost you about $120.00
Either the temp sensor or the fan motor is bad. I'm going with the sensor.
there is no fan belt. the fan is electric-motor powered.
motor mount motor mount
smash it!!!!