To open a Brinks resettable combination lock (US Pat No 6746075), first ensure the lock is in the locked position. Rotate the dial several times to clear it. Align the combination to the preset numbers by turning the dial to the right, stopping at each number, then turn to the left past the first number and stop at the second number, and finally turn to the right to the last number. Once the combination is entered correctly, pull up the shank to unlock.
Open the lock. Turn the hasp 180 degrees and push down. Set your new combination and pull hasp up and you're done.
To close a Brinks resettable combo lock, first ensure that the lock is in the open position by aligning the correct combination on the dials and pulling up the shank. Once open, simply push the shank back down into the lock body until it clicks into place, securing it. Make sure to scramble the dials to lock it and prevent unauthorized access. Always double-check that the lock is fully engaged before leaving it unattended.
Call this number: 1-800-562-5625. The manufacturer is Hampton Products. Your lock has a 100% warranty. Their customer service department will be able to help you out with any problems that you have with your Brinks lock.
To reset a resettable 3-digit Brinks lock, first, ensure the lock is in the open position. Locate the reset button or lever, usually found on the side or back of the lock. Press and hold the reset button while turning the dials to your desired combination. Once set, release the reset button, and your new combination will be saved.
I need to know how to use this lock again but unfortunately lost / forgot the combination, so please get back to me with an answe, I've been having this lock for many years. sincerely & fraternally
You can't
If your lock is a resettable kind, all you have to do is make a password that you can remember and save it. If you have a lock that cannot be resettable, look in your locks packet to find the combination or look at the back of your lock to see if it's been stuck there.
To reset a resettable 4-digit Brinks lock, first, locate the reset button or lever, often found on the side or back of the lock. Use a tool like a pen to press and hold the reset button while turning the dials to your desired new combination. Once you’ve set your new code, release the reset button. Test the new combination to ensure it works before using the lock.
Turn Shackle 180°Press DownHold DownTurn Shackle 90°Set New CombinationTurn Shackle BackThen Pullup
The changing of a Brinks lock combination depends on the model that you have. Most actually have a reset button that you hold down for 30 seconds to a minute.
My brinks locked in the open position. What do I need to do to get it fixed
hold reset and type the newcode!