Put cold water in the glass that is inside the other, and soak the outer glass in hot water. The hot water will swell up the glass and the cold will "shrink" the inside glass... then carefully wiggle them apart.
To remove a picture from glass that is stuck, you can try using a mixture of warm water and mild dish soap to gently loosen the picture. Alternatively, you can use a razor blade or a plastic scraper to carefully scrape off the picture. Be sure to handle the glass and tools with caution to avoid injury.
To effectively remove paper stuck to glass, you can try soaking the area in warm, soapy water to loosen the paper. Then, gently scrape it off using a razor blade or a plastic scraper. Be careful not to scratch the glass while doing so. If the paper is stubborn, you can also try using a mixture of vinegar and water or a commercial glass cleaner to help dissolve the adhesive.
To safely remove photo prints stuck to glass without causing damage, you can try using a gentle solution of warm water and mild dish soap to loosen the prints. Gently slide a plastic card or spatula underneath the prints to lift them off the glass surface. Avoid using sharp objects or excessive force to prevent tearing the prints or scratching the glass.
To safely remove photos stuck to glass without damaging them, you can try using a hairdryer on a low heat setting to gently warm the adhesive and carefully peel the photo off. Another method is to place the glass in a plastic bag and then in the freezer for a few hours to help loosen the adhesive. Be patient and take your time to avoid tearing or damaging the photo.
To safely remove a photo stuck to glass, you can try soaking the glass in warm, soapy water to loosen the adhesive. Gently peel the photo off using a soft cloth or sponge. If the photo is still stuck, you can try using a hairdryer on a low setting to warm up the adhesive before attempting to remove it. Be patient and take your time to avoid damaging the photo or the glass.
To effectively remove a stuck screw from plastic, you can try using a lubricant like WD-40 to loosen the screw. You can also try using a rubber band or a rubber glove for better grip, or using a screw extractor tool if the screw is really stuck. Be patient and gentle to avoid damaging the plastic.
Remove (or have a professional remove) the center console. The cup holder may or may not be repairable.
If you have a photo stuck to glass and can't remove it, try soaking the glass in warm, soapy water to loosen the adhesive. Gently peel the photo off once it's softened. If that doesn't work, consider using a hairdryer on a low setting to heat the adhesive before attempting to remove the photo. Be patient and careful to avoid damaging the photo or the glass.
I had this issue on my '87. I pried the plastic panel out of the channel enough to work the prybar into the latch and work it open.
To remove a photo stuck to glass, you can try soaking the glass in warm, soapy water to loosen the adhesive. Gently peel the photo off once it has softened. If that doesn't work, you can also try using a hairdryer on a low setting to heat up the adhesive and carefully peel the photo off. Be patient and gentle to avoid damaging the photo or the glass.
The word glass in this case isn't necessarily referring to the material glass, but instead referring to a small, handheld vessel for drinks, or a cup. Things that are usually, if not always made of glass have often been referred to as a "glass". For instance, a mirror may sometimes, but not very often, be referred to as a glass. With glass cups, and goblets the name "glass" stuck and became the definitive name for anything with that shape for the purpose of holding drinks. When one of these is made of plastic, it can be referred to as a "plastic glass", especially if the plastic is designed to visually replicate glass.
I just had to replace my glass. I bought the replacement at the dealer for $54.00 and they would not tell me how to do it. Remove any glass remaining. There should be a plastic piece with a circle of holes in it. I used a flathead screw driver and stuck it in each hole to force the plastic retianing clips to let loose. Then the plastic came off. Push the new glass replacement in plasce and the plastic clips snap it in place. Email harwell@bigfoot.com if need be. Autozone makes a double sided replacment mirror glass that replacment that fits exactly. Costs about $5-$7. I put one in about two years ago and it's like original. full coverage glass on your insurance will cover that.