answersLogoWhite

0

ONLY TO BE DONE BY A RESPONSIBLE ADULT CHILDREN - PLEASE DON'T TRY TO DO THIS BY YOURSELF! TAKE GREAT CARE

TO BE WELL PREPARED

WITH THE RIGHT CALM ATTITUDE

BEFORE

YOU ATTEMPT TO DO THIS! WARNING: If you do this be prepared for fire and smoke!

There will be dangerously hot molten metal!

If matters get out of control you must be prepared to

evacuate the house and call the local fire service!

Get: * A fire extinguisher of the dry powder type. (NOTthe type that uses water!)

* A pack of cleaner paste for the glass stove top. It's sold in supermarkets as "Hob Cleaner".

* A roll of paper kitchen towels.

* AT LEAST FOUR dry wooden (not plastic!) spatulas, the type you would use to flip eggs in a pan. These must be completelydry. They must not be wet!

* A dry metal non-aluminum container.

The container must be made of steel because it has a much higher melting point than aluminum. It must be clean and dry. (NO WATER! IT MUST BE DRY!) An empty steel "can", such as you buy soup or beans in, would be ideal. (The fact that it is probably made of steel plated with tin doesn't matter, as long as it is not an aluminum can.)

This should be placed on the undamaged part of the stove top so it is ready to drop molten metal into.

* Engineer's "machine workshop goggles" to protect your eyes.

* Thin gardening gloves, leather-faced or similar, to protect your hands.

* Place a half-filled bucket of cold water on the floor, ready for you to drop burning wooden spatulas into.

* If the stove has an overhead smoke extractor hood, be ready to use it.

METHOD

If you have one, switch on the extractor fan at full power. Put on the goggles and the gloves.

Switch on the ring so it is hot enough to just melt the aluminum. Then, VERY carefully, holding one dry wooden spatula in each gloved hand, scrape and scoop up the melted metal, one small "blob" at a time. Drop the molten blobs into the dry can. Be extra careful not to spill any onto the worktop, the floor - or yourself!. You must use two spatulas at a time otherwise you will only be able to move the melted metal around the stove top and you might easily get some onto the surrounding kitchen worktop and burn it.

When a spatula catches on fire and the flame doesn't go out, immediately drop it into the bucket of cold water.

If any fire or flame gets out of control switch off the stove top immediately and use the dry powder fire extinguisher to put out the flames. You must then let everything cool off completely before you clean up the mess and start over.

After you have gotten as much aluminum as possible off the hot ring: * switch off the stove top * leave it to cool down for at least an hour * switch off the extractor fan only after all smoke and fumes have gone.

Take off the goggles and gloves.

Put a teaspoon-sized blob of Glass Hob Cleaner paste onto the hob and use a dry paper kitchen towel to spread it all over the ring area. Let that cleaner paste dry off. Then use the paper kitchen towel to rub the dried cleaner paste into the stain over and over and, hopefully, you may get most of it off. However you may be unlucky and, even if you use the hob cleaner paste several times over several weeks, to try to remove the final stains, a weak stain may remain forever. Some people may recommend using the type of metal-handled scraper specially made for use on glass stove tops - they have a razor blade mounted on them - but if some of the aluminum has gotten burnt into the glass surface, there is no point in damaging the surface even more by attacking it with a sharp tool such as a metal scraper of any type.

User Avatar

Wiki User

∙ 17y ago
User Avatar

What else can I help you with?

Related Questions

How can I effectively remove melted plastic from a glass top stove?

To effectively remove melted plastic from a glass top stove, you can try using a plastic scraper or a razor blade to gently scrape off the melted plastic. Be sure to let the stove cool down before attempting to remove the plastic to avoid causing damage. You can also try using a mixture of baking soda and water to create a paste and gently scrub the affected area.


How can I effectively remove melted plastic from a stove top?

To effectively remove melted plastic from a stove top, you can try using a plastic scraper to gently scrape off the melted plastic. Then, use a mixture of baking soda and water to create a paste and apply it to the affected area. Let it sit for a few minutes before scrubbing with a sponge or cloth. Finally, wipe the area clean with a damp cloth.


How can I safely remove melted plastic from a glass top stove?

To safely remove melted plastic from a glass top stove, you can try these steps: Turn off the stove and let it cool down completely. Use a plastic scraper or a credit card to gently scrape off as much of the melted plastic as possible. Wipe the area with a damp cloth to remove any remaining residue. For stubborn spots, you can try using a mixture of baking soda and water to create a paste and gently scrub the area. Finally, wipe the stove clean with a damp cloth and dry it thoroughly.


How can I effectively remove melted plastic from a glass stove top?

To effectively remove melted plastic from a glass stove top, you can try using a plastic scraper or a razor blade to gently scrape off the melted plastic. Be sure to do this carefully to avoid scratching the glass surface. You can also try using a mixture of baking soda and water to create a paste, apply it to the melted plastic, and let it sit for a few minutes before wiping it off with a damp cloth.


How do you remove whats left of Teflon coated trousers that have melted onto the top of a steel logburning stove?

I'm afraid you'll need to scrape it off.


How can I replace a gas stove top in my kitchen?

To replace a gas stove top in your kitchen, follow these steps: Turn off the gas supply to the stove. Disconnect the gas line and remove the old stove top. Install the new stove top according to the manufacturer's instructions. Connect the gas line to the new stove top. Turn on the gas supply and check for any leaks. Test the new stove top to ensure it is working properly.


What are the steps involved in a gas stove top replacement?

The steps involved in a gas stove top replacement are: 1. Turn off the gas supply and disconnect the stove from the power source. 2. Remove the grates, burners, and knobs from the old stove top. 3. Unscrew and remove the old stove top from the countertop. 4. Place the new stove top onto the countertop and secure it in place. 5. Reattach the burners, knobs, and grates. 6. Connect the gas supply and power source. 7. Test the new stove top to ensure it is working properly.


How can I replace a glass stove top?

To replace a glass stove top, first turn off the power and disconnect the stove. Remove the screws holding the old top in place and carefully lift it off. Place the new glass top in position and secure it with screws. Reconnect the stove and power it back on to test the new top.


What are the steps involved in the process of electric stove top replacement?

The steps involved in replacing an electric stove top are: 1. Turn off the power supply to the stove. 2. Remove the old stove top by unscrewing it and disconnecting the wires. 3. Place the new stove top in position and connect the wires. 4. Secure the new stove top in place by screwing it in. 5. Turn the power supply back on and test the new stove top to ensure it is working properly.


How can I install a gas stove top?

To install a gas stove top, first turn off the gas supply and ensure proper ventilation. Remove the old stove top and connect the gas line to the new stove top following manufacturer instructions. Secure the stove top in place and test for leaks before using. It is recommended to hire a professional if you are not experienced with gas appliance installation.


What is the best method for cleaning and maintaining a glass stove top using glass stove top polish?

The best method for cleaning and maintaining a glass stove top using glass stove top polish is to first wipe down the stove top with a damp cloth to remove any loose debris. Then, apply a small amount of glass stove top polish to the surface and buff it in using a soft cloth in circular motions. Finally, wipe off any excess polish with a clean cloth to reveal a shiny and clean stove top.


What are the steps involved in replacing a ceramic stove top?

Replacing a ceramic stove top involves the following steps: 1. Turn off the power to the stove. 2. Remove the old stove top by unscrewing it from the appliance. 3. Disconnect any wires or connections. 4. Place the new ceramic stove top in position. 5. Reconnect any wires or connections. 6. Secure the new stove top in place by screwing it in. 7. Turn the power back on and test the stove.