0
Call a plumber!
ANS 2 -If you mean the water supply pipe for the dishwasher, then it's easy to totally disconnect the copper at the dishwasher connection and at the shutoff valve. Replace it with a flexible rubber, SS braided one. Purpose built for dishwashers to allow easy movement. -Available in HD or ' big box' stores. less than $20
What else can I help you with?
Does a compression fitting have to be replaced on copper pipe to hook up a dishwasher and if so how do you get the old one off?
Compression fittings unscrew. Inside you will find an 'olive' (a thin copper ring) which is compressed onto the pipe to create a seal when the outer nut is tightened up. If you wish to replace the compression fitting then you may need to use a junior hacksaw to saw through & remove the olive - be careful not to cut into the pipe unless you wish to replace it too. As for the dishwasher I would guess that you could use the same fitting unless it is leaking. If it is leaking then replace the olive as above.
Can you you plastic pipe instead copper for pluming in shower?
Yes, plastic pipe, PEX, can replace copper anywhere now.
How do you replace thermocouple in a Williams wall unit?
unscrew it replace it, copper pipe coil easy to replace. Two pipe nuts about 3/8"
How do you stop a leak on PVC pipe?
Detect the leak and replace that part of the pipe. It is usually better to replace the whole piece of pipe. By removing the junk plastic and replace it with quality piping such as copper DWV or NHCI
Why should you not replace a section of galvanized iron pipe with copper pipe when doing plumbing repairs?
Because you will then get a 'galvanic reaction'.
How do you unclog sitting water in dishwasher?
Clean the discharge pipe under the sink where it joins either to the garburator or the drain pipe. Run the dishwasher through a cycle and it should pump the water out thoroughly. Otherwise the pump on your dishwasher is not working properly.
You want to replace old lead pipe connected to cast iron sewer pipe with copper How do you connect the copper pipe to the old lead pipe or to the cast iron pipe?
When I have to connect copper to lead "D" I usually solder the copper to the lead or wipe a lead joint depending on the diameter To connect copper to cast iron ,.... If there is a hub I caulk the copper directly into the CI with oakum and poured lead (molten) OR one can solder / braze a female adapter fitting and screw the copper into a CI female fitting
How can I efficiently replace a copper pipe with PEX in my plumbing system?
To efficiently replace a copper pipe with PEX in your plumbing system, follow these steps: Turn off the water supply to the area where you will be working. Cut the copper pipe using a pipe cutter. Clean the ends of the copper pipe and PEX tubing. Install the appropriate fittings to connect the PEX tubing to the existing plumbing. Use a crimping tool to secure the connections. Turn the water supply back on and check for leaks. Insulate the PEX tubing if needed.
How do you get rid of mineral build up in hot water pipes?
Replace them with copper or plastic pipe.
Why is water flowing out of the y-shaped pipe that is under my kitchen sink and connected to the dishwasher drain?
The pipe has plastic or rubber gaskets in them at the joints. Sometimes they wear out or the pipe gets bumped by moving something under the sink, moving the gasket out of place.
What is the correct routing for the dishwasher drain hose?
The correct routing for the dishwasher drain hose is to loop it up and secure it under the sink before connecting it to the drain pipe to prevent backflow of water.
How many feet of copper pipe are in a house?
That would depend on lots of factors. When I bought my current home, there was no copper pipe in it, it was all galvanized. Many modern homes have PVC piping in many places. And how many bathrooms are there? How many kitchens? Sinks? Washing machine? Dishwasher? Swimming pool?
