One measure does not directly translate to another. A BTU is the amount of heat that it takes to raise the temp of one pound of water by one degree F. A burning match, and a burning fireplace may both be at 650 degrees, but the fireplace gives off more heat (more BTUs)
6,520 Btus
One pound of steam at 212 degrees Fahrenheit contains 1150 BTUs of energy.
650 degrees Celsius is equivalent to 1202 degrees Fahrenheit.
To calculate the BTUs required to raise the temperature of 15 pounds of water, you can use the formula: BTUs = Weight of water in pounds × Temperature change in degrees Fahrenheit × 1 BTU So, the calculation would be: BTUs = 15 lbs × (130°F - 100°F) × 1 BTU = 15 lbs × 30°F = 450 BTUs.
there is no conversion from temperature to BTU unless you know the mass and specific heat of a substance at a certain temperature. Then you could calculate the BTU required to heat the substance from a known starting temperature up to an ending temperature.
The element with a melting point of 650 degrees Celsius is tin (Sn).
650 degrees Celsius is equal to 1202 degrees Fahrenheit. You can convert Celsius to Fahrenheit by multiplying by 9/5 and then adding 32.
650 deg Celsius = 1202 deg Fahrenheit.
The melting point of magnesium is approximately 650 degrees Celsius.
That will completely depend on how much water there is.
To calculate the BTUs needed to raise the temperature of a 40-gallon water heater by 60 degrees Fahrenheit, you can use the formula: BTUs = gallons × temperature rise × 8.34. For a 40-gallon heater, it would be 40 gallons × 60°F × 8.34 BTU/gallon°F, resulting in approximately 20,016 BTUs. Therefore, it takes about 20,016 BTUs to achieve that temperature increase.
To change 10 pounds of ice at 20 degrees Fahrenheit to steam at 220 degrees Fahrenheit, you need to supply enough energy to first melt the ice, then heat the water to the boiling point, and finally convert it to steam. This process requires approximately 180 BTUs per pound of ice to melt it, 180 BTUs per pound of water to heat it to the boiling point, and then 970 BTUs per pound of water to convert it to steam. So, for 10 pounds of ice, the total BTUs required would be around 18,300 BTUs.