0
What else can I help you with?
What are the advantages and disadvantages of hydrometer?
Using a hydrometer has the advantage of only involving singular measurements and is an effective method to measure liquids. A disadvantage of using a hydrometer is that there is typically more waste and a longer cleaning time.
What is the advantage of using PLM?
What is the advantage of using an PLM
Ask us does Country X have an absolute advantage over Country Y in the production of corn?
To determine if Country X has an absolute advantage over Country Y in the production of corn, we need to compare the production efficiency of both countries. If Country X can produce more corn using the same resources or can produce corn at a lower cost than Country Y, then it has an absolute advantage. Conversely, if Country Y can produce more corn or do so more efficiently, then it holds the advantage. Analyzing their production capabilities and resource utilization will clarify the situation.
Advantage of using template in an organization?
advantage of using template in an orgainsation
When does country x have an absolute value over country y in the production of corn?
Country X has an absolute advantage over Country Y in the production of corn when it can produce more corn using the same amount of resources, or the same amount of corn using fewer resources, compared to Country Y. This means that Country X is more efficient in corn production, allowing it to yield higher outputs or lower inputs in the process. Absolute advantage is determined by comparing the productivity levels of both countries in corn production.
What are the methods of separation of gas liquid?
Rectification. By using a rectification column, that has a pressure and temperature difference across it. The column also contains a series of perforated trays, which allows liquid to trickle down and gas to flow up.
What is an advantage of using multiple lines on a line graph?
By using multiple lines you can show multiple pieces of data; e.g. if you have a test for the heat of liquids, then you can show multiple different liquids on the same graph. Like water and oil, you can show the water as one line and the oil as another. Saving you the need to make more graphs and making data easier to compare.
What is the advantage of using telnet in router configuration?
The main advantage of using this is remote access on the network.
What are the advantage's of using the potato propagation?
the advantage of using tjis type of propagation is how the plant reproduce
True or false: Did the team identify the clear liquids using the property of magnetism?
False. The team did not identify the clear liquids using the property of magnetism.
Explian about cryogenic hardening?
Cryogenic hardening is often referred to cryogenic treatment and cryogenic processing. Using the term "hardening" is not correct. Cryogenic treatment does not increase the hardness of metals (I.E. rockwell hardness). Rather it changes metals on the molecular level so that they perform better. Cryogenic treatment is used for a variety of reasons including improving dimensional stability, stress relieving, increasing wear resistance, and eliminating walk and creep. A typical cryogenic treatment lasts for several days. Metal and steel parts will be put in a cryogenic processor at room temperature. The temperature will slowly be taken down to -300F below. Then it will hold there for 12 to 24 hours depending on the company doing the treatment. After that, the processor will have the temperature raised back to room temperature very slowly. Finally, the parts will be post-tempered to finalize the cryogenic treatment. Cryogenic treatment re-aligns the micro-structure of the metal to improve its structural stability. Retained austenite will be converted to martensite which allows for a tougher piece of metal. The eta-carbides in the metal will become precipitated which allows for a much higher degree of wear resistance. Below are some good sites for additional reference...
What are the advantages of using oils?
The advantage of using oil is to make things work. (For example you take advantage of oil by using it in transportation.)
