It could just need routine service. If mine goes out twice it means that a service is required, then It works fine.
You are probably suffering from the change in standards of heating oil that occurred towards the end of 2008 when we changed from the old British Standard for kerosene to the new EU standard which drastically reduced the amount of sulphur in fuel. This has the effect of causing increased sooting and carbon build up around the fuel line and wick of an Aga or Rayburn. Over time this carbon build up restricts the flow of oil from the fuel line and eventually the oven becomes starved of oxygen. As a possible solution, I recommend the use of a fuel additive which can counteract the effects of low sulphur content and clean your carbonised Aga have a look at http://www.ecofuelplus.co.uk/#/aga-rayburn/4539905465
or Aderco 5000.
The pilot light on the stove may keep going out due to a dirty or clogged pilot light assembly, a faulty thermocouple, or a lack of gas flow. It is important to clean the pilot light assembly and ensure proper gas flow to prevent the pilot light from going out.
The pilot light may keep going out due to a dirty or faulty thermocouple, a draft in the area, insufficient gas flow, or a problem with the gas supply.
The water heater pilot light may keep going out due to issues with the thermocouple, a draft in the area, or a problem with the gas supply.
Spillage
The pilot light on a furnace may keep going out due to issues with the thermocouple, a dirty or clogged pilot light orifice, a faulty gas valve, or insufficient gas flow. Regular maintenance and cleaning can help prevent this issue.
Your furnace pilot light may keep going out due to issues such as a dirty pilot light, a faulty thermocouple, a draft in the area, or a problem with the gas supply. It is important to have a professional inspect and repair the furnace to ensure safe and efficient operation.
There could be a draft causing the pilot light to go out.
The pilot on your water heater may keep going out due to issues with the thermocouple, gas supply, or ventilation. These problems can prevent the pilot light from staying lit consistently.
The pilot light on a gas stove may keep going out due to a dirty or clogged pilot light orifice, a faulty thermocouple, insufficient gas flow, or a draft affecting the flame. Regular cleaning and maintenance can help prevent this issue.
Check your instructions, Usually you have to keep it on pilot mode for 30 seconds then you should be able to turn it to on without the pilot flame going out.
There are several possible reasons why your pilot light keeps going out. It could be due to a dirty or faulty pilot light assembly, a draft in the area where the pilot light is located, a malfunctioning thermocouple, or a problem with the gas supply. It is recommended to have a professional technician inspect and repair the issue to ensure safe and proper functioning of your appliance.
The pilot light on your water heater may keep going out due to a variety of reasons, such as a faulty thermocouple, a dirty pilot light orifice, inadequate gas supply, or a draft near the water heater. It is important to have a professional inspect and repair the water heater to ensure safe and efficient operation.