answersLogoWhite

0

It depends how far you have to put the wire into the wall. Turn off the electricity! Then use a wire coat hanger that is bend straight and tie the wiring onto that (for short distances.) If it's a longer way to go then use a thin taut cord to work the wiring through the wall. It also depends on what direction you're fishing and what you're aiming for. Electricians use "fish tape" made of spring steel and wound on a spool. It can be pushed for long distances inside walls or ceilings (or even conduits) and around corners. Spools come in 50 ft or 100 ft or longer. The larger the hole the faster it is to find the fishing tool at the other end. Another tool is a flexible rod that screws together in several sections. Mine is 3 m long and has an interchangeable hook or needle on the end, depending on if you're pushing or pulling something. You thread a string in the needle and push it through the first hole and out the second, then undo the string and use that to pull the cable through. The most important tool for fishing wire is often the "helper" who can stand at the other hole and tell you if you're close, or even help grab the fishing tool as it comes by. A large dose of patience is also useful. Alternatively, if you're going to be putting several wires through the same area, you might consider installing a conduit with a pull box at each end. That way, next time you add a wire the conduit is already there.

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

How can I fish wire through a wall effectively?

To fish wire through a wall effectively, you can use a fish tape or a wire coat hanger to guide the wire through the wall cavity. Start by creating a small hole in the wall near the starting point and then use the fish tape or coat hanger to push or pull the wire through the wall to the desired location. Make sure to secure the wire to the fish tape or coat hanger securely to prevent it from getting stuck inside the wall.


How can I fish a wire through a wall effectively?

To fish a wire through a wall effectively, you can use a fish tape or a wire coat hanger to guide the wire through the wall's openings or cavities. Start by creating a small hole in the wall near the starting point and use the fish tape or coat hanger to push or pull the wire through to the desired location. Make sure to secure the wire to the fish tape or coat hanger securely to prevent it from getting stuck inside the wall.


How can I effectively fish wire through a wall for my electrical installation project?

To effectively fish wire through a wall for your electrical installation project, you can use a fish tape or fish rods to guide the wire through the wall's cavity. Start by creating a small hole in the wall near the electrical box, then carefully feed the fish tape or rods through the hole and navigate it through the wall until it reaches the desired location. Attach the wire to the fish tape or rods and pull it back through the wall, ensuring it is securely in place. Be patient and gentle to avoid damaging the wire or the wall.


How can I effectively fish wire through a wall?

To effectively fish wire through a wall, you can use a fish tape or a fish rod to guide the wire through the wall cavity. Start by creating a small hole in the wall near the starting point and another hole near the ending point. Then, insert the fish tape or rod into the first hole and carefully maneuver it through the wall until it reaches the second hole. Attach the wire to the fish tape or rod and pull it back through the wall, ensuring it is securely in place.


How can I effectively run wire through a wall?

To effectively run wire through a wall, you can use a fish tape or wire snake to guide the wire through the wall cavity. Start by creating a small hole in the wall near the starting point and another near the ending point. Then, feed the fish tape or wire snake through the first hole and carefully guide it to the second hole. Attach the wire to the fish tape or wire snake and pull it back through the wall. Be sure to secure the wire properly and patch up any holes created during the process.


How can I effectively fish wires through walls?

To effectively fish wires through walls, use a fish tape or wire snake to guide the wire through the wall cavity. Start by creating a small hole in the wall near the starting point and carefully feed the fish tape or wire snake through the hole. Use a stud finder to avoid obstacles and guide the wire to the desired location. Be patient and gentle to avoid damaging the walls or the wire.


How can I fish electrical wire through walls or ceilings?

To fish electrical wire through walls or ceilings, you can use a fish tape or a wire snake. First, locate the starting and ending points for the wire. Then, feed the fish tape or wire snake through the wall or ceiling, guiding it along the desired path. Once the tape or snake reaches the endpoint, attach the electrical wire to it and carefully pull it back through the wall or ceiling. Be sure to follow all safety guidelines and regulations when working with electrical wiring.


How can I effectively pull wire through a wall?

To effectively pull wire through a wall, start by creating a pathway using a fish tape or wire snake. Attach the wire to the end of the tool and carefully guide it through the wall, making sure to avoid any obstacles. Use a stud finder to locate and avoid studs, and be patient and gentle to prevent damaging the wire or the wall.


How can I effectively fish wires through walls for my home renovation project?

To effectively fish wires through walls for a home renovation project, you can use tools like fish tape or wire rods to guide the wires through the wall cavity. Start by creating a small hole in the wall near the starting point and another near the ending point. Then, use the fish tape or wire rods to navigate the wires through the wall, being careful to avoid obstacles and sharp edges. It may also be helpful to have a partner assist you by feeding the wires through from the other end.


How can I effectively run speaker wire through walls?

To effectively run speaker wire through walls, you can follow these steps: Plan the route of the wire and locate any obstacles in the wall. Use a stud finder to locate the studs in the wall. Cut a small hole in the wall near the floor and ceiling where you want the wire to run. Use a fish tape or wire snake to guide the wire through the wall cavity. Secure the wire to the studs using cable staples or clips. Patch up the holes in the wall once the wire is in place.


How can I effectively use electrical fish wire for fishing wires through walls and ceilings?

To effectively use electrical fish wire for fishing wires through walls and ceilings, first, locate the starting and ending points for the wire. Next, attach the fish wire to the wire you want to pull through. Then, carefully feed the fish wire through the wall or ceiling, using a twisting motion to navigate obstacles. Finally, once the fish wire reaches the desired location, gently pull it through while guiding the wire you want to install.


How can I determine the location of a broken wire within a wall?

To determine the location of a broken wire within a wall, you can use a wire tracer or a stud finder with a built-in wire detection feature. These tools can help you locate the wire by detecting the electromagnetic field it emits. Alternatively, you can also use a multimeter to test for continuity along the length of the wire to pinpoint the break.