No it is not it is just under your bmi is 24.8 the Overweight bmi is 25 I would recommend you do lower it though
I disagree with the above answer. Go to bmi-calculator.net and this is the answer you will get. If you notice it says normal weight AND it says to check your waist circumference as well as your BMI and to keep that within the recommended limits.
BMI is between 18.5 and 24.9 (Normal Weight)
People whose BMI is within 18.5 to 24.9 possess the ideal amount of body weight, associated with living longest, the lowest incidence of serious ilness, as well as being perceived as more physically attractive than people with BMI in higher or lower ranges. However, it may be a good idea to check your Waist Circumference and keep it within the recommended limits
58 ÷ 100 × 163 = 35.58%
58 kilograms is 127.87 pounds.
Jessica Alba weight is 127 lbs (58 kgs)
Yes. At the 2012 Games in London, women will compete in 7 weight classes of weightlifting ... flyweight (48 kg/105.8 lbs), featherweight (53 kg/116.8 lbs), lightweight (58 kg/127.8 lbs), middleweight (63 kg/138.9 lbs), light-heavyweight (69 kg/152.1 lbs), heavyweight (75 kg/165.3 lbs), and super-heavyweight (over 75 kg/165.3 lbs).
Time = Distance/Speed = 163/55 = 2.96 hours or 2 hours 58 minutes (approx).
58 lbs
58 kg, 128 lbs
58 kg and 128 lbs.
To convert kg to lbs you have to multiply the weight in kg with 2.20462. This will give you the weight in pounds. Kg and pound. Kilogram is an SI unit of mass whereas Pound is an imperial unit of mass. The answer after conversion is 127.868 Pounds (Approximately).
Use the following sequence in order to tighten the cylinder head:Tighten bolt 1 to 63 Nm (46 ft. lbs.).Tighten bolt 2 to 58 Nm (43 ft. lbs.).Tighten bolt 3 to 58 Nm (43 ft. lbs.).Tighten bolt 4 to 63 Nm (46 ft. lbs.).Tighten bolt 5 to 63 Nm (46 ft. lbs.).Tighten bolt 6 to 58 Nm (43 ft. lbs.).Tighten bolt 7 to 58 Nm (43 ft. lbs.).Tighten bolt 8 to 63 Nm (46 ft. lbs.).Tighten bolt 9 to 63 Nm (46 ft. lbs.).Tighten bolt 10 to 58 Nm (43 ft. lbs.).Use J36660-A to tighten all the cylinder head bolts an additional 90 degrees in sequence
16 oz net weight per pound so 58x16 = 928 oz per 58 lbs
absulutely not