answersLogoWhite

0

Resetting code on Samsonite suitcases

Look behind the lock on the inside of the case there is a tiny part (like a stick shift) sticking out of a square about 1 cm across move it to the diagonally opposite side (some move sideways toward the numbers and then up to hold it in place) reset code
return shift to old position.


For those without the little stick shift part, try this:

  • With the case open, and the current combo in place, hold down the shackle (the little grey or black button beside the combination numbers).
  • While holding this shackle down, rotate the numbers to the number YOU WILL REMEMBER. (Holding the shackle down allows the numbers to tumble without moving the divots.)
  • Let go of the shackle -these numbers are now associated with the divots.
  • Now your combination should be set to the number you wish.


For those with combination locks on a zipper hardshell, try this:

On the bottom edge of the casing surrounding the lock there is a small button. With the combination set to the current "open" numbers, depress the button with the end of a pen or something similar. It should "click" and stay depressed. Now turn the combination settings to a new number YOU WILL REMEMBER. Next, pull on the release button. The button will snap back out and the numbers you have set the combination to will now be the ones that open the lock.


For those with neither one of the above options:

Try pushing the latch that usually opens the case towards the center (where the handle is) and set the new code while keeping the latch pushed towards the middle.

The latch usually opens the suitcase with the right combination when pushing it away from the middle (towards left and right) for setting the code you need to push the latch in the opposite direction (towards the handle).

Once you have the new lock code set, release the handle and you are good to go.
User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How tp open the combination lock of samsonite briefcase?

To open a combination lock on a Samsonite briefcase, first locate the dials and ensure they are set to the correct combination. If you don't know the combination, you may need to contact Samsonite customer service for assistance or refer to the briefcase's manual if available. If it's a resettable lock and you’ve forgotten the combination, look for a reset mechanism, which may require a specific tool or method to change the code. Always be cautious not to force the lock, as this could damage it.


How do you fix a samsonite briefcase lock?

To fix a Samsonite briefcase lock, first, check if the lock mechanism is jammed or stuck. Try gently wiggling the lock while applying pressure to see if it will release. If the lock is not functioning, you may need to reset the combination by following the manufacturer's instructions, which usually involves pressing a reset button while setting a new code. If these steps don't work, consider contacting Samsonite customer service for further assistance or to inquire about repair options.


What is the average price range for a Samsonite briefcase?

The average price range for a Samsonite briefcase is actually quite difficult to find as there are a few types of briefcase that differ in price, but the cheapest model ranges from $34 to $54.


How do i re enter my briefcase pin?

== == I ran into this once, and it seemed like I had to push the square 'opener' in the opposite direction that you would use to open the case. This then set the new combo to whatever numbers are in that position when you do this. This was an older Samsonite, but it worked. If not, try Samsonite's website or just do a web search on 'how do I reset my briefcase's combination'.


Where can a black Samsonite briefcase be purchased from?

A black Samsonite briefcase can be purchased online on places such as eBay, Luggage Pros, or Wayfair. Prices can range from around $70s to almost $200s.


How do you reset the tsa007 approved samsonite lock?

A TSA007 Approved Samsonite Lock can be reset at any respectable locksmith, as they will possess the correct tools necessary to reset the lock without breaking it or damaging it.


How to reset a briefcase combination?

Call a Locksmith :)


How do you reset the combination on your presto briefcase?

To reset the combination on your Presto briefcase, first, open the briefcase using the current combination. Locate the reset button or lever, typically found near the lock mechanism. Press and hold the reset button while setting your new desired combination. Release the button, and your new combination should now be set. Be sure to test the new combination before closing the briefcase.


Reset combination on old samsonite hard case?

To reset the combination on an old Samsonite hard case, locate the reset button, usually found near the locking mechanism. Open the case using the current combination, press and hold the reset button, and then set your new desired combination. Release the reset button to save the new combination. Make sure to test the new code several times to ensure it works before closing the case.


How do you reset the 3 digit combination lock on Mont Blanc briefcase?

To reset the 3-digit combination lock on a Mont Blanc briefcase, first, open the lock using the current combination. Once open, locate the reset lever or button, often found on the side or back of the lock mechanism. Move the lever to the reset position, set your new combination by turning the dials, and then return the lever to its original position to save the new code. Test the new combination to ensure it works before closing the briefcase.


How do you reset the combination on a samsonite luggage lock?

To reset the combination on a Samsonite luggage lock, first, locate the reset button, usually found on the side or bottom of the lock. Press and hold the reset button while setting your desired new combination by turning the dials. Once you've chosen your combination, release the reset button to save the new code. Make sure to test the new combination before closing the lock to ensure it’s set correctly.


How do you reset a samsonite suitcase that has a 3 digit lock?

To reset a Samsonite suitcase with a 3-digit lock, first, open the suitcase using the current combination. Locate the reset button or lever, typically found near the lock mechanism. Press and hold the reset button while setting your desired new combination by turning the dials. Once you've chosen the new combination, release the reset button, and test the new code to ensure it works properly.