im not talking about the cord itself , im talking about the brick or trasformer thats located inline that regulates current to your lap top. main question again is this suppose to get hot ?
Hot cords I assume you mean the cord itself is hot. Yes, this happens when you are either putting to much load on the cord or are using too light of a cord on too long a distance. The cord usually at the plug can melt and then short out. Fire a very real possiblitiy
The wire that is hot on an extension cord is typically the black wire.
The most number of outlets on a multi outlet extension cord are six. Any more then six outlets on an outlet extension cord and it would become dangerous.
Depends on the size of the wire in the extension cord. The 3 prong is just the hot, neutral, and ground.
The recommended length for an extension cord to safely use with a hot tub is 25 feet or less, and it should be a heavy-duty, outdoor-rated cord with a grounded plug.
You can plug an extension cord into another extension cord. A extension cord is to help make doing something easier.
form_title= Extension Cord form_header= Install extension cords in your office. What size extension cord do you need?*= _ [50] What color extension cord do you need?*= _ [50] Do you need a 3 prong extension cord?*= () Yes () No
It is not recommended to create a DIY extension cord for electrical needs as it can be dangerous and pose a risk of fire or electric shock. It is best to purchase a certified extension cord from a reputable manufacturer to ensure safety and compliance with electrical standards.
It is never as good idea to run an extension cord to a high drain appliance like an electric motor. However if you must for a temporary situation.. use a good 10 or 12 gauge heavy cord and not more than like 25 feet.. DO NOT use a cheap 16 Ga cord from walmart... your pump and the cord will get VERY hot and that can be dangerous for both you and the pump
If your extension cord is truly a 30 amp cord then it is composed of #10 wire. #10 wire is rated at 30 amps. All you have to do is remove the 30 amp plug and receptacle ends from the cord and install 15 amp cord ends.
The hot wire on an extension cord is typically smooth. The ribbed wire is usually the neutral wire. Make sure to check the cord carefully to confirm the proper identification of wires before handling or using it.
No, it is not safe to plug one extension cord into another extension cord as it can create a fire hazard due to potential overloading of the electrical circuit.
No, it is not safe to plug one extension cord into another extension cord as it can create a fire hazard due to overloading the electrical circuit.