answersLogoWhite

0

Ordinary Hazard Group 1 density is 0.15 gpm/sq ft over 1500 sq ft if wet pipe system Ordinary Hazard Group II density is 0.20 gpm/sq ft over 1500 sq ft if wet pipe system (according to NFPA 13) There are factors that can change the density and area requirements depending on variou sfactors, but in general the above densities/area are correct.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

3 WHAT is the Minimum Density for Automatic-Sprinkler Piping Design in light hazard occupancy?

0.10 gpm over 3000 square foot area.


Who do pots belong to that are attached to a automatic sprinkler in a sale of a home?

Who do flower pots belong to that are connected to an automatic sprinkler system in the sale of a home?


What is the minimum sprinkler density for h-4 occupancy?

The minimum sprinkler density for H-4 occupancy, which typically includes high-hazard facilities like those storing flammable liquids, is generally 0.30 gallons per minute per square foot (gpm/ft²) over the most hydraulically demanding area. However, specific requirements can vary based on local codes and the design of the sprinkler system. Always consult the applicable building codes and standards, such as NFPA 13, for precise specifications.


What other country aside from the US is noted for its interest in developing the automatic fire sprinkler system?

England is noted for its interest in developing the automatic fire sprinkler system.


When was the sprinkler system invented?

Inventors first began experimenting with automatic sprinklers around 1860. The first automatic sprinkler system was patented by Philip W. Pratt of Abington, MA, in 1872.


What sprinkler systems are the simplest types of automatic fire sprinkler system?

Automatic Sprinkler of Connecticut LLC specializes in the simplest and most cost-effective types of automatic fire sprinkler systems, wet pipe sprinklers. Wet pipe sprinklers are the most common type of sprinkler system and are very reliable. They use water from a pressurized supply line to activate the sprinklers in case of smoke or heat detection, quickly suppressing any fires while minimizing damage.


Its low melting point is useful in automatic sprinkler systems?

The low melting point of a material used in automatic sprinkler systems helps it to quickly release water when exposed to heat, activating the sprinkler system. This property ensures rapid response and effective fire suppression.


What are the two basic categories of fire sprinkler systems?

Residential and commercial Wet and dry standby Manual and automatic Deluge and sprinkler-head-valved


What was invented in 1897?

cotton candy was invented. the first automatic lawn sprinkler was invented!!!!!!!1


i am looking for design of storage building.?

With the high summer temperatures this year, many people are interested in having automatic sprinklers for their yards. Most homeowners choose to have automatic sprinkler systems installed for them, while if you are handy you can do it yourself. One option is to turn to Rain Bird, one of the leaders in automatic sprinkler installation. You can go direct to their site, fill out some simple forms and their designers will contact you to find the best automatic sprinkler for your landscape. They will also help you with referrals with local contractors in your area.


What is an average commercial sprinkler density in GPM per Sq Ft?

The average commercial sprinkler density typically ranges from 0.1 to 0.3 gallons per minute (GPM) per square foot, depending on the type of occupancy and the fire hazard classification. For instance, light hazard areas may require lower densities, while higher hazard areas may necessitate higher densities. It's essential to consult local fire codes and standards, such as NFPA 13, for specific requirements related to sprinkler system design.


What is the maximum distance between fire sprinkler heads?

That would depend upon what type of sprinkler it is, how far apart they are, what type of occupancy, what is the purpose of the wall and the material of the wall, among other things. For example, some walls do not need any sprinklers at all.