The quantity require is the same volume it takes to impreganate a woman.
the snuffing steam will used to protect fired systems(e.g heaters) using process liquid or gas. While the gas or liquid leak( or either by psv pops) detects then the snuffing valves gets opens to send the steam to the vent/ exhaust, until the steam can see on thst. Hence the potential fire will be broken out.
How much steam is required to produce 5 MW power in steam turbine?In fully condensing turbine we will need 20 TPH steam required to generate for 5MW
jacking oil is not required when stopping the steam turbine
The amount of heat removed during the process of steam condensing and then freezing into ice is calculated by adding the heat required to condense the steam and the heat required to freeze the resulting water. This is determined using the specific heat capacity and latent heat of vaporization/condensation for water.
quantity of steam generated in a boiler is usually measured in TPH ie tonnes per hour
to produce 1 ton of steam how many GCV of coal is required?
when steam flow blockage occured in steam turbine due to damage of blades/nozzles than steam temperature will increase so protect the turbine from high temperature this protection is introduced.
no, it is not required.
The burning match stick produces a sound because of the heat its flames are producing. The snuffing of the fire produces a tiny bit of steam, which make the hissing sound.
The steam required for steam tracing is calculated on the basis of the amount of heat transfer that is required or the temperature that you want to maintain with the help of steam. It also depends on the pipe material through which the steam is passing,the condition of the steam that whether it is saturated or superheated etc. Overall heat transfer cofficient is calculated considering all the factors like fouling or scaling,inside and outside dia. , surface area etc. After calculating the amount of heat to be transferred, the requirement of rate of steam is calculated. Generally, Low pressure steam is used as it has got more latent/Sensible heat as compared to MP or Superheated steam.
by means of mechanical or electrical overspeed protection mechanism
6