There are a few different types of dry powder. The most common one, suitable for class A, B, C and electrical fires ((A=Solids, B=Liquids, C=Flammable Gases) and found in most household units, contains monammonium phosphate. This decomposes in a flame and produces free radicals (unpaired electrons) which interrupt the combustion process. Additionally, the chemical melts and forms an insulating "skin" on burning solids, smothering the flames. (Note - the fire clases above are for UK regulations; in North America the fire classification is: A=ordinary combustibles, B=flammable and combustible liquids and gases, C=energized electrical equipment/appliances).
Units using sodium bicarbonate are not used on class A fires, but are particularly effective on liqud (class B) fires. Potassium carbonate (purple K) is sometimes used as an alternative.
For motor racing, where rapid fire knockdown is needed, Monnex (combining a bicarbonate powder with urea) is used; this has superb quenching power for liquid fuel fires.
Finally, there are specialsit powders available for dealing with burning metals, which react with all other extinguishing agents and powders. These contain powdered sodium chloride, powdered graphite or powdered copper metal.
A car extinguisher may be necessary for putting out several different types of fires, so it should be a Class A:B:C extinguisher, normally dry powder. For an irreplaceable classic, one might consider a CO2 or a "clean agent" extinguisher, to avoid the damage potential of dry powder chemical extinguishers.
You would not want to use a pressure water extinguisher on any electrical fire due to the possibility of electricity being conducted through the water and injuring someone. A CO2, dry chemical or "clean agent" (e.g., "Halogenated") extinguisher would be a better choice for an electrical fire, knowing that dry chemical powder will make quite a mess.
wind
treatment for breathing in fire extinguisher power
Foam, dry powder or CO2 gas- a Class B extinguisher
Because that is what the Dry powder (or Dry Chem.) is made for.
baking powder
powder or foam :)
To put out a fire involving LPG (liquefied petroleum gas), it is important to turn off the gas supply if it can be done safely. Use a fire extinguisher suitable for flammable liquids, such as a dry chemical extinguisher. If the fire is too large to be extinguished with a portable extinguisher, evacuate the area and call emergency services for assistance.
The PKP fire extinguisher, or Potassium Bicarbonate Powder extinguisher, is a type of dry chemical fire extinguisher primarily used for extinguishing flammable liquid fires and electrical fires. It works by discharging a cloud of potassium bicarbonate powder that interrupts the chemical reaction of combustion. PKP extinguishers are effective on Class B (flammable liquids) and Class C (electrical) fires, making them suitable for various industrial and commercial applications. They are often recognized by their red color and are commonly found in settings where flammable substances are present.
A hydrocarbon fire extinguisher is a type of fire extinguisher specifically designed to combat fires fueled by flammable liquids such as gasoline, oils, and grease. These extinguishers contain agents like dry powder or foam that work by smothering the fire and cutting off the oxygen supply to extinguish the flames.
NO!!!!! Use a Dry Chemical extinguisher