0
What else can I help you with?
When mounted how far apart from other fire extinguisher?
Fire extinguishers shall be mounted 75 feet apart
The carburetors on inboard mounted gasoline engines must be equipped with an approved back-fire flame arrestor What purpose does having a back-fire flame arrestor play?
To prevent a back-fire which results when unburned exhaust collects in the engine area
Where is firefighting equipment located in childcare services?
fire extinguisher is located outside the toilet area mounted on wall and other mounted on wall next to activity table and upstairs we have fire blanket and extinguisher in staff room mounted on shelf in the kitchen and other in the room.exit signs at each exit door.fire alarm and detection system are installed in each room.
Can you block access to a wall mounted fire extinguisher?
Yes, you can, but it would violate the fire code and common sense.
Where should fire extinguisher's be stored on a boat?
Fire extinguishers should be stored and mounted where they are readily accessible on a boat, where they will not be damaged and where they can be inspected regularly.
How can I properly hang a fire extinguisher to ensure it is easily accessible in case of an emergency?
To properly hang a fire extinguisher for easy access in case of an emergency, follow these steps: Choose a location that is easily visible and within reach, preferably near an exit. Use a sturdy mounting bracket to secure the fire extinguisher to the wall or a post. Make sure the fire extinguisher is mounted at the proper height, typically between 3 to 5 feet above the floor. Ensure that the fire extinguisher is not blocked by any obstacles and is easily visible and accessible.
Which one of the following is a coast guard requirement for a fire extinguisher?
A Coast Guard requirement for a fire extinguisher is that it must be USCG-approved and appropriately sized based on the vessel's length and type. Additionally, it must be readily accessible, properly mounted, and maintained in good working condition. Vessels over 26 feet are typically required to have at least one B-1 type fire extinguisher. Regular inspections and servicing of the extinguisher are also necessary to ensure compliance.
What is the standard mounting height for a fire extinguisher?
Portable fire extinguishers under 40 pounds should be mounted so that the top is no more than 5 feet from the floor; those over 40 pounds, within 3 1/2 feet. The bottom must be at least 4 inches from the floor, unless the extinguisher is on wheels. NFPA 1.
What type of candles can be mounted on a wall?
Any candle can be mounted on a wall as long as it has the appropriate fitting. Candles are dangerous and need to be treated carefully so that they remain safe. It is important to make sure that the candle is mounted securely on the mount and it is an appropriate size for the candle holder.
What does a B-1 fire extinguisher do?
B-I is the minimum US Coast Guard approval rating for extinguishers on powerboats. It corresponds to a UL Class 5-B:C, 2-pound, dry chemical extinguisher that has been properly packaged and mounted for USCG approvals as well. It could also mean a 4-pound CO2 extinguisher or a 7-quart foam extinguisher. What can you do with it? Well, a B-1 rated extinguisher is just the thing for putting out "flammable liquid" fires on boats, a B-1 or B-2 rated extinguisher being required by the Coast Guard to operate the vessel. If the gasoline or diesel fuel spills and catches fire, your extinguisher will probably be adequate to put it out, provided that you act promptly. The UL 5-B rating implies that a novice firefighter can extinguish 5 square feet of flaming liquid fuel using that extinguisher. The C rating means it is also approved for use on energized electrical fires, i.e., it is non-conductive.
Is there a OSHA regulation for fire extinguishers on forklifts?
No, not specifically. But if the Fork Truck came with a fire extinguisher attached as original equipment, it must be maintained unless the manufacturer approves a change. The local fire officials may require that a fire extinguisher of a specific class and rating be mounted on a forklift, and it must be inspected (every 30 days) and maintained annually like any other portable fire extinguisher. NFPA 505 (Fire Safety Standard for Powered Industrial Trucks [including forklifts]). If there is a fire extinguisher on the machine, the machine operator is required to be trained in its proper use.
Where can you hang fire extinguisher in the house?
Any portable fire extinguisher should be placed where it is visible and accessible. Many commercial kitchens are also required to have a built-in fire extinguisher over the cooking area and inside the exhaust hood, and a portable Type K fire extinguisher within 30 feet. A portable fire extinguisher should be located near an exit so that a person who chooses to stop and use the extinguisher can do so without becoming trapped by the fire. Like all portable fire extinguishers, the ones in the kitchen should be mounted with the bottom at least 4 inches above the floor and the top no more than 5 feet (60 inches) from the floor, unless they are over 40 pounds. In that case, they should be on wheels or mounted with the top no more than 3 ft (36 inches) from the floor. This information is from NFPA 1 Fire Code. Your local requirements may vary.
