0
What else can I help you with?
Can you extinguish a candle fire by pouring water on it?
No, pouring water on a candle fire is not recommended as it can cause the hot wax to splatter and spread the fire. It is safer to use a fire extinguisher or smother the flame with a fire blanket.
Why doesn't water put out electric fires?
Water can conduct electricity, so when water comes into contact with an electrical fire, it can actually spread the fire rather than extinguish it. Water may also cause a short circuit, leading to further electrical hazards. It's safer to use a dry chemical fire extinguisher designed for use on electrical fires.
Why is it not advisable to pour water on a kerosene caused fire?
Pouring water on a kerosene fire can spread the flames and cause the fire to intensify due to the kerosene's ability to float on top of the water. This can make the situation more dangerous and difficult to control. It is better to use a fire extinguisher or sand to smother the fire.
Should a gasoline or electrical fire be put out by water?
Neither a gasoline or electrical fire should be put out by water. A gasoline fire should be put out by a fire extinguisher labeled A B C. An electrical fire should first have the power switched off. Then the fire extinguisher should be used.
Does water make fire go out?
Water will work against most fires but not against grease, electrical, or metal fires.
Why do you not use water to put out fat fire?
You never use water to put out a fat fire, because the pouring water on burning grease or oil will not extinguish the fire. It will only cause the burning oil to splash, spreading the grease fire around.
Why is water and foam unsuitable for extinguishing electrical fires?
Water and foam are unsuitable for extinguishing electrical fires because they are conductive. When they come into contact with live electricity, they can conduct the current and increase the risk of electric shock. Additionally, water can cause the fire to spread by splashing the burning material.
What is the worse way to put out a fire?
Well the worst way to put out a GREASE fire is to put water on it.
What type of extinguisher should be used on an electrical fire?
A water-type or water-based foam type of extinguisher should not be used on an electrical fire because water and foam are electrical conductors and could result in electrocution of the person using the extinguisher or anyone stepping in the water.
Which was worse in history flood or fire?
Floods because there was no way to prevent them whereas you could douse a fire with water
Why water is not used to extinguish class e fire?
Class e is an electrical fire. Water is not usedbecausewater and electricity do not mix.
How do you extinguish an oxidising flame?
To extinguish an oxidising flame, you should remove the oxygen source by covering the flame with a non-flammable material like a fire blanket or using a fire extinguisher designed for oxidising fires. Never use water on an oxidising fire as it can make it worse.
