Incense can potentially set off a fire alarm, especially if it produces a significant amount of smoke or if the alarm is particularly sensitive. Most smoke detectors are designed to respond to various types of smoke, including that from burning incense. To minimize the risk, it's advisable to burn incense in well-ventilated areas and keep it away from smoke detectors. However, the likelihood of triggering an alarm varies depending on the type of alarm and the amount of smoke produced.
Any type of smoke, steam or particles denser than air will set off a smoke alarm. This means that smoke emitted from the incense will set off a smoke alarm when in range of the detector.
Manually turning off a shunt trip breaker should not set off the fire alarm. The only way that the breaker could set off the fire alarm when turned to the off position is if there is an auxiliary contact on the breaker connected to the fire alarm circuit. This is not usually done because the breaker should be able to be turned off when doing maintenance on the breakers circuit. If the breaker is a mandatory feed breaker to a piece of fire alarm equipment and shouldn't be left in the off position it might have a trouble circuit connected to the fire alarm panel. A trouble alarm on a fire alarm panel is different from an alarm circuit alarm.
No
Isn't it obvious...
No. The fire alarm was set off after an incompetent employee microwaved their tea and the had to evacuate the building.
we set the fire alarm off accidently in a building and the truck turnedup. How much do they charge to come?
Depending on how loud your alarm is,it is possible that it may set off another cars alarm.
You can set the alarm off by just simply jumping on the car.
They can be the same thing. Fire Alarm Systems are electronic systems which are designed to warn and alert people in the case of a fire. These systems usually contain a central fire alarm control panel, a manual call point and smoke/heat detectors. The heat detectors and detect heat and set off the fire alarm and the smoke detectors detect the smoke from a fire to also set of the fire alarm system. The manual call points are pressed, smashed by someone in order to set off the fire alarms to warn occupants that there is a fire. Heat detectors and usually used in kitchens, bioler houses etc where a lot of smoke/stome is produced, thus stoppping false alarms. Although, you can get seperate heat detection systems which nearly do the same job as fire alarm systems, just with heat detectors.
If you set the alarm (i.e. lock the car) and then disconnect the battery, the alarm will go off. If you disconnect the battery when the alarm is not set (i.e. when the car is unlocked) the alarm will not go off. (So don't try to nick a locked one).
Set it on Fire!!! =]
An alarm remote is a remote control for an alarm system. A remote alarm is an alarm that rings somewhere far away from whatever set off the alarm.