the height of a capillary tube is not dependent on
The purpose of a Capillary Tube is to allow blood to complete a path between arteries and veins permit oxygen and nutrients to be absorbed by cells and provide a means for cell wastes to enter the blood stream
Mercury falls in a capillary tube due to the combination of capillary action and gravity. Capillary action is the tendency of a liquid to be drawn up into a narrow tube against the force of gravity. When the adhesive forces between the mercury and the walls of the capillary tube are greater than the cohesive forces within the mercury, the mercury will move downward in the tube.
The capillary tube is fixed in the Ostwalds viscometer is for passing the liquid.
The capillary tube is used on the inside of the refrigerators. It is a long copper tubing that is used as a thruster.
deduce an expression for height of a liquid in capillary tube. also write practical applications of capillary action.
To measure the diameter of a capillary tube using a traveling microscope and vernier caliper, place the capillary tube on a flat surface. View the capillary tube through the traveling microscope to measure the external diameter. Then, use the vernier caliper to measure the internal diameter by gently inserting the capillary tube between the jaws of the caliper to get an accurate measurement. Subsequently, calculate the average diameter using the two measurements.
capillary tube
capillary tube.
If a capillary tube unit frosts down the suction tube, it may indicate a restriction in the capillary tube, improper refrigerant charge, or a problem with the system's airflow. It is recommended to check for any blockages in the capillary tube, ensure the system has the correct refrigerant charge, and inspect the airflow to troubleshoot and resolve the issue.
A capillary tube is placed in a fusion tube to allow for precise temperature measurement and control during the fusion process. The capillary tube contains a small sample that can be heated uniformly, enabling the observation of the sample's melting point. This setup helps in determining the purity and characteristics of the substance being tested. Additionally, the capillary tube provides a clear view of the sample's behavior as it transitions from solid to liquid.
The rise around the edges is called the meniscus, like capillary action this is caused by the adhesion of the liquid molecules to the walls of the container. In a large bore tube like a test tube or graduated cylinder this pulls up the edge and creates a concave meniscus, in a smaller bore tube this actually pulls the liquid toward the top of the tube.