answersLogoWhite

0

Here's what TheCoffeeBrewers has to say:

What is the Best Water for Brewing Coffee or Espresso?Did you ever notice how salt will "bring out" the flavor in food (which is why professionally prepared restaurant food tends to be salty)? On the other hand, have you noticed how salt (and other minerals; particularly calcium) will buildup on shower walls and plumbing fixtures?

When you prepare coffee or espresso, you need to be aware of the mineral content in the water that you are using. Since the preparation of (American) coffee and espresso are predicated on very different extraction techniques, the "best" water is different for coffee than it is for espresso.

To review (or in case you weren't aware), the flavor in coffee is mostly contained within the oils within the beans. Brewing coffee or espresso is a matter of extracting these flavors from the beans (the coffee grounds) so that they permeate the water.

The preparation of plain coffee is a steeping process, almost exactly like tea. The coffee grounds (coarse grounds work better for plain coffee) are mixed with near-boiling water. The heat and minerals in the water work together to extract the flavor from the coffee. After a short steeping period, the grounds are strained out of the mixture (via a filter), leaving the beverage known as "coffee."

To get a flavorful coffee, there must be mineral content in the water. If the water is distilled, or if it has been softened too much (softening is the process of removing minerals), the extraction will be weak, and the beverage will be relatively flavorless-as food can be if no salt is used.

On the other hand, espresso extraction is a very different process that does not require minerals, and in which near-boiling temperatures are actually detrimental. For espresso, a more finely ground coffee is first compressed into a "puck" through which water will not pass easily. Ideally, immediately prior to extraction, the puck is pre-wet (both to begin dissolution, and to make the density within the puck uniform, so that the extraction will also be uniform).

Then, hot water (195-200 degrees Fahrenheit) is rapidly pushed through the puck under pressure. Ideally, the pressure should be in the 10-15 bar range (1 bar = 14.6 pounds per square inch), and the extraction time should be 20-25 seconds, maximum. (A longer extraction will result in a bitter and burnt flavor.)

In this kind of extraction, since the water is forced through the puck very rapidly (each water molecule moves through the puck in a fraction of a second), the water is not in contact with the coffee long enough for the minerals (in the water) to play much of a role in the extraction.

Also, for those of you who have taken some Chemistry, you may remember the ideal gas law: PV = nRT. While we are dealing with fluids in this case, note that Pressure (P) and Temperature (T) are on opposite sides of the equation. Since we do espresso extraction under (relatively) high pressure, we do not need a boiling temperature.

In fact, water that is too hot will over-extract the espresso, resulting in a bitter flavor. The reason that moka pots (stovetop brewers) tend to make bitter brews is because the temperature is steam temperature, and the pressure is too low, so the extraction will tend to be too long.

Therefore, minerals in water will not enhance the flavor of espresso. On the other hand, minerals will build up on the inner surfaces (the boiler, the internal tubes, and the portafilter) of the espresso machine. This buildup will alter the pressure within the machine, and it will corrode the internals of the machine.

The gradually increasing pressure change will adversely cause the uniformity of the extraction (hence, the flavor) of the espresso to change over time. The added pressure will also cause the internal pumps and gaskets to wear out quickly. By far, the one thing that is most detrimental to an espresso machine is mineral buildup.

This is why it is so important to do periodic cleaning of an espresso machine (as per the manufacturer's recommendations) with a de-scaling agent. In addition, it is best if you use distilled water, or at least a water softener. For commercial machines (which will see heavy use), an in-line water softener is essential.

While drip coffee-makers will also get mineral buildup, and should be de-scaled occasionally, this is just so that the water will flow (at all) through the machine. Since no pressure in involved in the brewing of drip coffee, mineral buildup will not damage a drip coffee-maker the way that it will destroy an espresso machine. If you have an expensive espresso machine, it is imperative to keep it clean.

For plain coffee, a minimum mineral content of 150-200 parts per million is essential to a good extraction. Water softer than this will result in weak and flavorless coffee. For espresso, you should use distilled water. If the espresso machine is connected to the building plumbing, an in-line water softener (to remove the minerals) is essential.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

How can I effectively unclog my Keurig coffee maker?

To effectively unclog your Keurig coffee maker, you can try descaling it with a vinegar solution, cleaning the needle with a paperclip, and running a few cycles of water through it.


How can I unclog my Keurig coffee maker effectively?

To unclog a Keurig coffee maker effectively, you can try descaling it with a vinegar solution, cleaning the needle with a paperclip, and running a few cycles of water through it.


How can I fix a Keurig coffee maker that is clogged?

To fix a clogged Keurig coffee maker, you can try descaling the machine with a vinegar solution, cleaning the needle with a paperclip, and running a few cycles of water to clear the clog.


Is it possible that my Keurig seems clogged?

Yes, it is possible that your Keurig coffee maker is clogged, which can happen due to mineral buildup or coffee grounds blocking the water flow.


How can I effectively unclog a Keurig coffee maker?

To effectively unclog a Keurig coffee maker, you can try running a mixture of vinegar and water through the machine, followed by several cycles of just water. You can also use a paperclip to clean out any clogs in the needle.


How do I unclog my Keurig coffee maker?

To unclog your Keurig coffee maker, you can try descaling it with a vinegar solution or using a paperclip to clear any blockages in the needle. You can also run a cycle with just water to help remove any buildup.


How do I properly clean and maintain the water reservoir of the Keurig K155 coffee maker?

To properly clean and maintain the water reservoir of the Keurig K155 coffee maker, regularly remove the reservoir and wash it with warm, soapy water. Rinse thoroughly and allow it to dry completely before reattaching it to the coffee maker. Additionally, descale the coffee maker every 3-6 months to prevent mineral buildup and ensure optimal performance.


What are the key features of the Keurig 155 coffee maker?

The key features of the Keurig 155 coffee maker include a large water reservoir, multiple cup size options, a programmable brew time, and compatibility with a variety of K-Cup pods for different coffee flavors.


How can I fix a clogged Keurig coffee maker?

To fix a clogged Keurig coffee maker, you can try descaling the machine with a vinegar solution, cleaning the needle with a paperclip, and running a few cycles of water through the machine. If the issue persists, you may need to contact Keurig customer support for further assistance.


What are the key features of the Keurig K45 coffee maker?

The key features of the Keurig K45 coffee maker include its ability to brew various cup sizes, a removable water reservoir, a descaling function, and compatibility with a wide range of K-Cup pods for different coffee flavors.


How to unclog a Keurig coffee maker?

To unclog a Keurig coffee maker, first remove the water reservoir and clean it thoroughly. Then, use a paperclip or a needle to clear any clogs in the needle that punctures the K-cup. Run a cycle with just water to flush out any remaining debris.


Why is my Keurig coffee maker clogged and how can I fix it?

Your Keurig coffee maker may be clogged due to mineral deposits or coffee grounds blocking the water flow. To fix it, try descaling the machine with a vinegar solution or using a paperclip to clear the needle. Regular cleaning and using filtered water can prevent clogs in the future.