The maximum acceptable level of contaminants in drinking water is typically set at 0.01 parts per million (ppm). This means that water with 0 ppm of contaminants is considered to be of the highest quality, as it contains no harmful substances that could potentially impact human health.
The maximum allowable noise level in a residential area is typically around 55 decibels. This is considered the threshold for acceptable noise levels in residential areas.
An acceptable resistance for a ground to ground plate system is 2 ohms with a maximum allowance to 5 ohms. If the measured resistance is above 5 ohms more grounding rods or plates have to be added to reduce the resistance down to the acceptable levels.
The maximum safe level of water toxicity for humans is typically measured by the concentration of specific contaminants in the water. This level is determined by regulatory agencies and can vary depending on the contaminant. Adverse health effects can occur if the concentration of contaminants in water exceeds the established safe levels. It is important to regularly test water sources for contaminants and adhere to regulatory guidelines to ensure safe water consumption.
The maximum displacement of a wave is measured by its amplitude. Amplitude refers to the maximum distance that a wave's particles are displaced from their rest position.
Maximum demand is usually observed and not measured, depending upon which discipline is involved.==Maximum demand is measured using a thermal demand indicator, which is installed at the substation.
True
inches
7% to10% of body weight per month is an acceptable figure for maximum weight loss.
The acceptable noise level in a residential area is typically around 55 decibels, which is considered the maximum limit for maintaining a peaceful environment.
The acceptable noise level in a residential area is typically around 55 decibels, which is considered the maximum limit for maintaining a peaceful environment.
10s
The maximum torque that this engine can produce is 350 Nm.