0
Yes, but it should be in a solid square block, by pressed machine so that minimize to become ash when put into the melting furnace.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What is the odor of aluminum?
Aluminium is odourless, certainly as far as I can tell. A2. But I think cast aluminum sometimes contains a tiny amount of sulfur designed to lower the melting point to aid casting. But my search failed to turn up a reference. Interesting. Aluminium melts at a relatively low temperature anyway, so maybe your thought refers to another cast metal. Some of the resins used in casting sands to improve adhesion can liberate sulphur dioxide or ammonia (pungent smells) when the hot metal is poured into the mould.
How can marble turn back into limestone?
df
Do dirt turn to mud and mud turn back into dirt?
It is the water content (or lack of) that alters the condition of the dirt (soil).
If you soak a raisin in water does it turn back into a grape?
lol no I have tried. It just gets really wet
Do most raindrops start as snow or ice?
rain drops do not start out as snow or ice. they evaporate from bodies of water go up into the clouds and then fall back down to the ground. when it snows or hails the water first evaporates them becomes a cloud then as it falls back down to earth the freezing air will either turn it to ice or turn it to snow.
Does aluminum foil corrode if left outside?
Aluminium does corrode. The difference between the corrosion of aluminium and the corrosion of iron (rust), is that aluminium corrosion is galvanic- the oxidised layer that forms acts as a very thin protective barrier to the aluminium beneath it in a process called galvanization, impeding the corrosion process. In comparison, iron oxide does not seal the metal beneath it, and successive layers are exposed and oxidised in turn.
What color does aluminium turn when heated?
it turns purple when heated
Can acetone be used to remove paint from aluminium?
It will turn aluminum black
What color does blue litmus paper turn with aluminium hydroxide?
red
Is aluminum a secondary or primary source of light?
Aluminium is not normally a source of light. I suppose if you made a large mirror out of it you could turn that into a secondary source.
Will aluminum turn black if caustic soda applied to it?
Pure aluminium will not. Others will, depending on the composition.
How would you turn atoms and aluminum into gaseous phase?
The boiling point of aluminium is 2 470 0C.
Why would aluminium oxide be good to use for drill heads?
no it is not a type for drills it would just turn to powder when you drill.
Why is high energy use an important issue for the aluminium industry?
The aluminum industry is profoundly energy concentrated, has huge ecological effect and delivery an enormous extent of energy as waste intensity. The creation energy required, energy misfortunes and energy content of the waste intensity is measured. Vedanta Aluminium is a global leader of aluminium industries, in addition to one of the largest companies in India. Among the world’s most versatile metals, aluminium is hired through our clients a good variety of product that make stylish life possible – from smartphones and constructing substances to meals packaging and car elements.
Why is aluminium used to make transmission wires?
The lightness of the material allows for longer spans between supports. This in turn is a big money saving factor in the construction of transmission lines.The type of conductor is ACSR, Aluminium Conductor Steel Re enforced. The steel in the conductor is in the center of the conductor and the aluminium conductors are wrapped around the steel.The steel allows for the longer spans and helps prevent conductor sag on hot days or when the line is carrying a heavy connected load that will apply heat to the conductor.
What is the effect if the aluminium is melted at a temperature higher than melting temperature?
Firstly, the aluminium will turn to aqueous (like liquid) at its melting temperature (660 degrees Celsius). After this, it will turn to a gas at (2519 degrees Celsius); its boiling temperature. The transition from solid to liquid can be represented on a graph as a curve, y=lnx and the transition from liquid to gas is the curve y=e^x continuing from the former curve. A chemical reaction for this is; Al(s) + O2(g) => Al3+O2-(aq) ------ from solid to liquid (aqueous) Al2O3 => Al(s) + O2 ------ from liquid to gas Notice that the gas O2 is emitted, this is an importance aspect of chemistry since aluminium can be purify by this process. The aluminium is refined into its pure solid form.
What color flames do you get when you burn aluminum?
when aluminium sulphur is burnt in a blue flame the flame will turn to an orange flame
