answersLogoWhite

0

Sealant to keep the aquifer within the layer or layers of containing material, usually rock.

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Earth Science

What soil makes the best aquifer?

Sandy soil with good permeability and porosity makes the best aquifer, as it allows water to flow easily through the spaces between particles while holding enough water to sustain an aquifer. Clay soil, which has low permeability, is not well-suited for aquifer formation.


Is clay an example of impermeable material?

Clay can be impermeable due to its dense and tightly packed structure, which restricts the movement of water or other liquids through it. However, the permeability of clay can vary depending on factors like the type of clay, compaction level, and presence of other materials.


Why does water stop traveiling through the soil and remain in an aquifer?

Water stops traveling through the soil and remains in an aquifer when it encounters a layer of impermeable rock or clay that prevents further downward movement. The water then accumulates in the porous spaces of the aquifer, such as sand or gravel, where it is held by the forces of gravity and capillary action.


Why does water stop traveling through the soil and remain in an aquifer?

Water stops traveling through the soil and remains in an aquifer when it encounters a layer of impermeable rock or clay that prevents further downward movement. The water then accumulates in the porous spaces within the aquifer, creating a reservoir that can be tapped as a source of groundwater.


Why couldn't the ogallala be replenished by watering its recharge zone?

The Ogallala Aquifer cannot be replenished as quickly as it is being depleted because the recharge zone receives limited precipitation and the process of water seeping down to the aquifer is slow due to the thick layer of clay and sediment. Additionally, increased pumping for agricultural and urban use has further strained the aquifer's ability to recharge naturally.

Related Questions

Will a good aquifer form in a layer of clay?

Clay can form a barrier to water flow and prevent the formation of a good aquifer. However, if the clay layer is thick and overlain by a permeable layer, it can act as a confining layer for an underlying aquifer, enhancing its ability to hold water. Ultimately, the presence of other factors like the porosity and connectivity of the rock material will determine if a good aquifer can form in a layer of clay.


What soil makes the best aquifer?

Sandy soil with good permeability and porosity makes the best aquifer, as it allows water to flow easily through the spaces between particles while holding enough water to sustain an aquifer. Clay soil, which has low permeability, is not well-suited for aquifer formation.


Is clay an example of impermeable material?

Clay can be impermeable due to its dense and tightly packed structure, which restricts the movement of water or other liquids through it. However, the permeability of clay can vary depending on factors like the type of clay, compaction level, and presence of other materials.


Best type of rock to serve as aquifer?

Sandstone is a good type of rock to serve as an aquifer because it has high porosity and permeability, allowing water to flow and be stored within its layers. Additionally, sandstone is resistant to weathering and erosion, which helps to maintain the integrity of the aquifer over time.


Is it better to have high or low permeability with a good aquifer?

It is better to have high permeability with a good aquifer. High permeability allows water to flow more easily through the aquifer, making it easier to extract and transport water for human use. Low permeability can restrict water flow and make it more difficult to access water from the aquifer.


What is a good sentence for the word aquifer?

The artesian aquifer lies deep below the earth's surface. "Don't go down to the aquifer," warned Dr. Warren. "The last couple who went didn't come back!"


Why is it important to know the depth of an aquifer before drilling the well?

It's important to know the depth of an aquifer before drilling a well because if you drilled 35ft but there was a remaining of about 5-10 more feet you wouldn't really get all the water from the aquifer, and you'd run out of water in an amount of time.


Why does water stop traveiling through the soil and remain in an aquifer?

Water stops traveling through the soil and remains in an aquifer when it encounters a layer of impermeable rock or clay that prevents further downward movement. The water then accumulates in the porous spaces of the aquifer, such as sand or gravel, where it is held by the forces of gravity and capillary action.


Why does water stop traveling through the soil and remain in an aquifer?

Water stops traveling through the soil and remains in an aquifer when it encounters a layer of impermeable rock or clay that prevents further downward movement. The water then accumulates in the porous spaces within the aquifer, creating a reservoir that can be tapped as a source of groundwater.


How do you spell aquifer?

aquifer.


Which aquifer is NOT part of the greater Mountain Aquifer system?

Northern Aquifer


Can elmers glue glue clay?

Elmer's does not make a very good joint with clay. Many potters that I know use epoxy or silicone to repair their broken pots.