Resistance is measured in ohms and the amount of resistance that allows one ampere of current to flow when one volt is applied is one ohm.
describe how climate classifications is determined
The material itself and the Gage
The factors that determine resistance are thickness, length, temperature, and the conductivity of the resistance of an object
mohs scale of hardness
the material is used up
The electric resistance is related to the diameter and extension of the wire submitted to a determined voltage which will determine the electric current flowing into the wire.AnswerVoltage has no effect on resistance. Resistance is determined by the length, cross-sectional area, and resistivity of a material (resistivity is affected by temperature, so temperature indirectly affect resistance).
Electrical resistance can be determined by the equation that defines resistance - Ohm's Law. Just divide the voltage across a resistor, by the current passing through it.
describe how climate classifications is determined
basically it slows down the flow of current.max resistace = no currentmin. resistance = fullcurrent.AnswerI think you mean the principle, not 'principal', of resistance!Resistance is a natural property of any conducting material, and is determined by the length, cross-sectional area, and resistivity of that material. As resistivity is affected by temperature, temperature indirectly affects resistance.Resistance is directly proportional to length -e.g. double the length of a conductor, you double its resistance.Resistance is inversely proportional to area -e.g. double the area of a conductor, you halve its resistance.Resistance is directly proportional to resistivity, which is determined by the material from which the conductor is made.Resistance does not 'slow down' an electric current. It acts to limit the current.
Bulk resistance is the ohmic resistance of the semiconductor material. The natural resistance of a "P" type or "N" type semiconductor material.
Material with high resistance
The laws of resistance describes the resistance of a specific material. There are a total of four laws of resistance.
The total resistance in a series circuit is determined by adding (summing) the individual resistances of each component in the circuit.
electrical resistence is occur in conductor due to over flow of current,in conductorAnswerResistance is not due to the 'flow of current'. It exists whether current is flowing or not! Resistance is determined by the type of material and its physical dimensions. Resistance depends upon the resistivity (which is also affected by temperature) of the material, and the length and cross-sectional area of that material.
You are probably looking for an answer like 'resistance' or 'resistivity', but these answers would be incorrect, because your supposition ('difficulty of flow') is incorrect .Resistance is the opposition to the drift of an electric current through a material. It's determined by the resistivity of that material, as well as by the length and cross-sectional area of that material.This opposition, however, is not a measure of the 'difficulty' of charge movement through the material. Rather, it is a measure of how well a material can support current due to the quantity of charge carriers available within the material.It's important to understand, for example, that insulators don't 'block' or 'make it difficult' for electric current, they simply don't have sufficient charge carriers available to supportelectric current.
Material with high resistance
The material itself and the Gage