0
What else can I help you with?
Separate sulfur and sugar from a mixture?
To separate sulfur and sugar from a mixture, you can use a process called filtration. First, dissolve the sugar and sulfur mixture in water; then filter the mixture. The sugar will pass through the filter paper while the sulfur remains behind.
How do you separate sand from sulfur?
Sulfur melts at a much lower temperature than sand. That might be useful. Also, there are solvents which will dissolve sulfur but not silicon dioxide. Finally, there's always the magnifying glass and tweezers method.
What could you use to separate sulfur and iron?
You can use a magnet to separate iron from sulfur since iron is magnetic while sulfur is not. By using the magnet to attract the iron particles, you can separate them from the sulfur.
How do you separate sulphur from roll sulfur and carbon?
To separate sulfur from roll sulfur and carbon, you can use a process called sublimation. In this process, the mixture is heated under controlled conditions, causing the sulfur to sublime and separate from the carbon. The sulfur vapor is then cooled and condensed back into solid sulfur.
What separation method do you use to separate sulfur sand and sodium chloride?
You can use a combination of filtration and evaporation. First, use filtration to separate the sulfur from the sand. Then, dissolve the sodium chloride in water and use evaporation to recover the salt once the water has evaporated, leaving the sand behind.
How do you separate sulfur suspended to water?
You can separate sulfur suspended in water by filtration. Pass the sulfur-water mixture through a filter to trap the sulfur while allowing the water to pass through. The collected sulfur can then be dried and separated from the filter.
How would you separate a sulfur suspended in water?
You can separate sulfur from water by using filtration. Simply pass the mixture through a filter paper to trap the sulfur while allowing the water to pass through. This will leave the sulfur behind, separated from the water.
What separating method is used for a mixture of sulfur and water?
Distillation can be used to separate a mixture of sulfur and water, as sulfur has a much higher boiling point than water. By heating the mixture, the sulfur will vaporize and can be collected separately from the water, which remains in liquid form.
Separate sulfur and sugar from a mixture?
To separate sulfur and sugar from a mixture, you can use a process called filtration. First, dissolve the sugar and sulfur mixture in water; then filter the mixture. The sugar will pass through the filter paper while the sulfur remains behind.
How do you separate sand from sulfur?
Sulfur melts at a much lower temperature than sand. That might be useful. Also, there are solvents which will dissolve sulfur but not silicon dioxide. Finally, there's always the magnifying glass and tweezers method.
How do you separate common salt sulphur powder and sand from their mixture?
You can separate common salt and sand by dissolving the mixture in water and then filtering the solution. The salt will dissolve in water, while the sand will remain as a solid. Next, you can separate the sulfur from the remaining mixture of sulfur and sand by using a magnet since sulfur is weakly magnetic.
How do you separate sulfur sodium chloride and water?
the salt(sodium chloride) wiil dissolve when put in water along with the rest of the mixture, leaving the sulfur all alone.
How will you separate a mixture of common salt and sulfur?
To separate a mixture of common salt (sodium chloride) and sulfur, you can use the process of filtration. The mixture can be dissolved in water, allowing the salt to dissolve while the sulfur remains solid. Filtration can then be used to separate the solid sulfur from the liquid salt solution. The salt can be recovered by evaporating the water.
How do you separate sufur and sodium chloride?
- Put the mixture in water. - Sodium chloride is soluble, sulfur not. - Filter the liquid. - Sulfur remain on the filter.
How do you separate sodium chloride and sulfur?
the salt(sodium chloride) wiil dissolve when put in water along with the rest of the mixture, leaving the sulfur all alone.
What could you use to separate sulfur and iron?
You can use a magnet to separate iron from sulfur since iron is magnetic while sulfur is not. By using the magnet to attract the iron particles, you can separate them from the sulfur.
Why can filtration be used to separate the copper sulphate from the sulphur?
Filtration can be used to separate copper sulfate from sulfur because copper sulfate is soluble in water, while sulfur is not. By adding water to the mixture and then filtering, the insoluble sulfur will remain on the filter paper, while the soluble copper sulfate will pass through as part of the filtrate.
