Always figure a drop of 2 degrees C per 1K feet in rise as a standard. So if the ground is near sea level, 30K feet would be 60C below ground temp. It varies somewhat, but that's the rule of thumb.
The standard atmosphere temperature at 10,000 feet altitude is approximately 23.4 degrees Fahrenheit or -4.8 degrees Celsius.
Degrees what?K or C - a high blue white starF - a low blue white star
The 30000 ANSI lumens
At 15,000 feet elevation, the air temperature can vary widely depending on multiple factors such as the time of day, season, and location. However, on average, the temperature at this elevation tends to be around 40-50 degrees Fahrenheit colder than at sea level.
At 90,000 feet in altitude, the temperature is approximately -94 degrees Fahrenheit (-70 degrees Celsius). This high up in the atmosphere, temperatures are extremely cold due to the thin air and lack of insulation.
To calculate the ambient temperature, you can use a thermometer to measure the temperature of the surrounding air. This measurement will give you the ambient temperature, which is the temperature of the environment around you.
There are 43560 square feet in an acre. Therefore, 30000 square feet is equal to 30000/43560 = 0.6887052341597796143250 recurring (that is, 0.68870523415977961432506887052341597796143250...) acres.
5280 feet = 1 mile 30000 feet / 5280 feet = 5.682 miles (rounded to third decimal).
What is the ambient temperature of the water?
There are approximately 322917 square feet in 30000 square meters.
A substance will exist as a gas at ambient temperature and pressure if its boiling point is below the ambient temperature and its vapor pressure exceeds the atmospheric pressure at that temperature.
1 mile = 5280 feet 30000 feet = 30000/5280 = 3000/528 = 750/132 = 375/66 = 125/22 = 5.681 miles
Ambient temperature.
It is the ambient temperature.
Ambient temperature simply means "the temperature of the surroundings" and will be the same as room temperature indoors..........Harshal P. Pawar
ambient air temperature is the temperature of your surrounding air. if you stand outside with a thermometer, and it reads 64 degrees, that is ambient temperature.
Ambient temperature in electrical installation refers to the temperature of the surrounding environment where the electrical components are being installed or operated. It is important to consider ambient temperature as it can affect the performance and lifespan of electrical equipment. Installations must be designed to account for the ambient temperature to ensure safety and efficiency.