Superchlorinate with 12.5% swimming pool chlorine and brush entire pool 2 times per day until green completely gone. Run filter 24/7 then back wash or clean filter. Maintain at least 5.0 10.0 ppm residual of chlor. until problem solved.
k
For an inground saltwater pool, the recommended levels are: pH: 7.2-7.6 Alkalinity: 80-120 ppm Cyanuric acid: 70-80 ppm Free chlorine: 1-3 ppm Bromine: 3-5 ppm It's important to regularly test and adjust these levels to maintain a clean and safe swimming environment.
There could be several reasons why a pool may have no chlorine. This could be due to insufficient chlorine added to the pool, the chlorine being depleted too quickly, or the pool's filtration system not functioning properly. It's important to regularly test and maintain the chlorine levels in a pool to ensure proper sanitation.
Free Chlorine is the Chlorine which is free to do its work in the pool, as opposed to Combined Chlorine which is chlorine that has combined with contaminants and is tied up and ineffective as a sanitizer in the pool. Sometimes you will see it abbreviated as FAC, which stands for Free Available Chlorine.
Other names for chlorine include Cl2, diatomic chlorine, and "pool shock" when used in pool disinfection.
Excessive levels of chlorine stabilizer can reduce the effectiveness of chlorine in the pool. Try diluting the pool water by partially draining and refilling it to lower the stabilizer concentration. Test the water again after dilution to see if the chlorine levels improve.
You can buy pool chlorine for an inground pool in Austin, Texas at your local Leslie's Pool Supply. They have a great selection.
The rainwater will be treated by the chlorine in the pool and you may have to adjust the chlorine levels. See the related link for more information.
Vacuum the pool to waste and/or empty the pool and shovel out the gunk. Sounds like the pool needs to be emptied anyway, so give it a chlorine wash (or acid wash) while its empty and then refill, add salt, install the necessary equipment and start over with a saline pool.
Need to rephrase question.
A light acid wash should remove the chalk.
Justin Bieber has a inground pool
Usually it is an imbalance of chlorine or PH, which lets algae live in the pool.
To remove tanning oils from your inground pool, you can use a combination of enzyme-based pool cleaners and chlorine. Enzymes break down organic materials, including oils, while chlorine helps sanitize the water. Additionally, using a pool clarifier can help coagulate and remove oils and debris. Regularly brushing and vacuuming the pool will also aid in removing any remaining residues.
You can find great tips about using chlorine for your pool on the following website: http://www.wikihow.com/Properly-Maintain-Swimming-Pool-Water-Chemistry. They have useful info.
you can back wash the pool and drain to proper level Throw a pool party with lots of energetic kids.
Bromine is a healthy alternative for those with allergic reactions to chlorine to clean your in-ground pool. Ozone generators with ultraviolent light is another healthy alternative to cleaning an in-ground pool.
How big is the star dust inground swimming pool.