An oxygen meter measures the amount of oxygen from the pulse in a finger by being placed on an individuals fingertip which causes two wavelengths to be able to pass through the individual to a photo detector.
An oxygen meter measures the percentage of oxygen in the air being tested.
to measure vertical movments-tilt meter to measure horizontil movments-creep meter
hygrometer
As the density of Oxygen at 0º C is 1.429 kg/m³ i.e. cubic meters * density = kilograms so, 1 cubic meter of oxygen would weigh 1.429 kilograms.
Dissolved Oxygen (DO) is really a physical distribution of oxygen molecules in water. There are two main sources of DO in water: atmosphere and photosynthesis. Waves and tumbling water mix air into water where oxygen readily dissolves until saturation occurs. Oxygen is also produced by aquatic plants and algae as a by-product of photosynthesis. The electrochemical method of measuring DO requires a cathode, anode, electrolyte solution and a gas permeable membrane. The material of the membrane is specially selected to permit oxygen to pass through. Oxygen is consumed by the cathode which will create a partial pressure across the membrane. Oxygen will then diffuses into the electrolyte solution. Thus, a DO meter actually measures the pressure of oxygen in water. It can be used to measure DO in any medium.
centimetres
An oxygen meter measures the percentage of oxygen in the air being tested.
A gauss meter is simply a tool to measure the amount of magnitism.
"A sound meter measures the pressure of sounds. It is used in measuring the amount of noise pollution, such as aircraft noise. The sound meter does not measure the amount of sound that humans hear. There is a different type of meter used for this."
You can use a force meter to measure the amount of force needed to pull a toy car towards you.
It'sa meter that measure how much crime there is in an area and the amount of Batman requried to fight it.
A=Spirometer(Answered by Teshome Seya)*source-Tbar's medical dictionary.A spirometer is a device that measures the volume of air inhaled and exhaled by the lungs.A spirometer is used to measure breathing.Spirometerspirometeryou donta stethascope. 
Probably because the meter stick is not accurate enough to measure the small amount of expansion of the rod. You need something smaller and more accurate.
Probably because the meter stick is not accurate enough to measure the small amount of expansion of the rod. You need something smaller and more accurate.
Using a meter stick, measure out a meter. Then turn pi/2 radians according to the unit circle and measure out another meter.
A meter stick is used to measure the length of fabric so that it is suitable and accurate for the amount of fabric needed based on the size required.
Impossible!!! Cubic meter is a volume measure and square meter is a measure of area!!!