Temperature generally decreases with increasing elevation due to the decrease in atmospheric pressure, which results in cooler conditions. As for latitude, temperature tends to decrease towards the poles due to the angle at which sunlight hits the Earth's surface, causing differences in heating and cooling patterns.
Three factors that influence an area's temperature are latitude, proximity to water bodies, and elevation. Latitude affects the angle at which sunlight reaches Earth, proximity to water bodies can moderate temperature through ocean currents, and elevation can impact temperature due to changes in atmospheric pressure and air density.
Climate regions vary with changes in elevation and latitude. As altitude increases, temperature generally decreases, which can result in different climate zones within a relatively small area. Additionally, elevation can also influence precipitation patterns due to changes in air pressure and the formation of rain shadows.
The proximity to a large body of water or ocean currents can impact the temperature ranges in cities at the same elevation and latitude. Ocean currents can transport heat, affecting the local climate and leading to variations in temperature ranges between cities.
Higher elevations usually are colder and wetter than lower elevations. Same with increasing latitude north or south, the temperature gets colder.
As elevation increases above sea level, temperatures tend to decrease. This is because the air becomes less dense at higher altitudes, leading to lower atmospheric pressure and reduced air temperature. This change in temperature with elevation is known as the lapse rate.
latitude
Temperature (latitude and elevation) Water (lack or proximity) Light (latitude)
elevation,wind,latitude, precipitation and temperature
temperature latitude elevation and precipitation
The temperature typically decreases by about 3.5F per 1000 feet increase in elevation.
Change in volume - container getting bigger or smaller with same amount of air; Change in temperature - air gets hotter or colder causing it to expand or contract; Change in density - air is pumped into or out of a fixed container.
Standard temperature change is 3 deg. F. per 1K ft.
As elevation increases, the temperature typically decreases. This is because air pressure decreases with altitude, causing the air to expand and cool. The rate of temperature decrease with elevation is called the lapse rate.
As elevation increases, temperature tends to decrease. This is known as the lapse rate, which is about 3.5°F for every 1,000 feet gained in elevation. This is why mountainous regions are often cooler than low-lying areas at the same latitude.
ocean currents, local geography,elevation,distance from large bodies of water and latitude
Latitude: 25°40′12″N Elevation: 1,444m (4,738 ft.)
The things that affect climate are global winds, ocean currents, distance to water, topography, latitude, and elevation.